LG Refrigerator Ice Makers

Ice Bin Assembly

7 Reviews

Part Number: AKC72949319

This part includes the container, auger and blades.

Refrigerator Ice Maker Kit Assembly

9 Reviews

Part Number: AEQ73110210

This wiring harness is 20 pin and 3 pin. Replacement ice maker for LG refrigerators. The ice maker assembly contains the mold to form ice and the ejection controls to fill the ice storage bin. Unplug the unit before performing installation of the assembly.

Ice Maker Assembly - 6 Wire

3 Reviews

Part Number: AEQ73110205

NOTE: As per manufacture the secondary (smaller) wire connector has 6 wires in it. If original ice maker has 3 wire connector see part number PS7788172. Please verify connector before ordering.

Refrigerator Ice Maker Assembly

2 Reviews

Part Number: AEQ72909603

This ice maker assembly is for refrigerators. Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

Ice Maker Assembly

2 Reviews

Part Number: AEQ36756901

The wire harness is NOT available separately. Refrigerator ice maker kit AEQ36756901 is an original equipment manufacturer (OEM) part that fits some refrigerators in these series: Kenmore 795; Kenmore Elite 795; and LG LFX, LMX and LSC. Ice maker AEQ36756901 receives water from the water inlet, holds the water in the ice mold until the water freezes solid and then automatically ejects the ice and refills to continue the process until the ice storage in is full. This ice maker kit contains the complete ice maker, housing and control device.

Ice maker Assembly Kit

3 Reviews

Part Number: AEQ72910409

Ice Tray

Part Number: 3390JA1150A

This part is the replacement ice tray for your refrigerator. The tray is made of white plastic and is approximately 9 inches in length, and 3 inches in width. It has the capacity for 8 ice cubes. The ice tray can be filled up with water and is the mold that shapes the ice cubes. If your current ice tray is cracked, warped, or if mineral deposits have settled inside it, it may cause the ice cubes to stick. This part is sold individually and is an authentic OEM part.

Ice Maker Assembly - 3 Wire

7 Reviews

Part Number: AEQ73110203

NOTE: The Secondary (smaller) wire connector has 3 wires in it. If original ice maker has 6 wire connector see part number AEQ73110205. Please verify connector before ordering.

Refrigerator Ice Bin

1 Review

Part Number: 5075JA1044E

This ice bin is for refrigerators. Ice bin stores ice cubes in the freezer section of the refrigerator. Follow the instructions in the owner's manual when installing this part.

Ice Maker

Part Number: AEQ72910411