Microwave Ducts and Vents

DAMPER

1 Review

Part Number: W10843943

This assembly includes the damper door and frame.

Damper

1 Review

Part Number: 4900W1A001B

The vent damper is used to close off the exhaust duct when the fan is not running, to prevent outside air from entering the microwave. When the fan turns on it allows air to vent away from the microwave. The damper measures approximately 10-inch long by 3-inchwide and is a genuine OEM part.

Air Duct Bracket

Part Number: 4810W1A151A

This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, and replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.

DAMPER

Part Number: WB06X10686

VENT

Part Number: 5304509646

Damper

Part Number: WB06X10565

This vent damper is a manufacturer-approved replacement part for your above-range microwave. This part helps vent air from the microwave to the exterior of your home, and helps keep exterior wind out of the vent. Replacing the vent damper will require some disassembly of your microwave/ Unplug the unit before beginning work on it.

Adapter Assembly,vent tube ,w/converter

Part Number: 318317100

Microwave Vent Damper

Part Number: WB06X10935

The vent damper attaches to the outer cabinet and directs airflow through the vent duct.

Bottom Vent - Stainless Steel

Part Number: WPW10351279

Assembly HOOD DAMPER

Part Number: WB06X10920