CNTRL-ELEC

Verified Purchase

My Jenn Air double oven was shutting down in the middle of operation and displaying error code "F8E1, Low fan speed overspeed". I had a repair man come in; after consulting with factory, he said the problem was with the oven software. The bug was fixed in later revisions. He said the repair required replacing front full front control panel assembly, which was only sold as a unit, and quoted $1500. I surmised that the software was on the control board, which was a subset of the assembly, and was available through Easy Appliance for about $500. The repair was fairly simple. 1. Turn off power at breaker. 2. Remove oven doors. (See oven installation manuel). 3. Remove screws on side of oven bezel going into your cabinet. 4. Pull oven assembly out from cabinet about six inches. 5. Remove 4 screws from side of front panel attaching it to main chassis. 6. Unplug cable on back of front panel. 7. Identify contol board on back of front panel. Remove the cable connected to it, and remove 4 screws holding board to panel. 8. Reassemble all components. 9. Turn power back on. Follow simple initialization procedure displayed on display screen. The new board solved the error condition.