A4425GDTW GE Refrigerator Parts List

Drawer slide rail - right side (refrigerator crisper drawer slide (rail) assembly for right hand side.)

This replacement drawer slide rail is for the right-hand side of your refrigerator. This part attaches to the inside wall of your refrigerator to support the sliding crisper drawer. If the rail is broken or the drawer is not sliding properly, you will need to replace the slide rail. You will need a Phillips screwdriver to complete this repair.

Ice maker (refrigerator icemaker kit, the kit includes the fill cup, 4 pin wire harness adapter, and tube.)

This ice maker assembly is used to make ice in your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold into the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. This kit includes the fill cup, 4-pin wire harness adapter, and a tube. Disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Drawer slide rail - left side (refrigerator crisper drawer slide (rail) assembly for left-hand side.)

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. This part includes the rail only.

Temperature sensor (refrigerator or freezer temperature sensor (also called a thermistor).)

The temperature sensor, also known as a thermistor, helps detect the temperature inside the refrigerator and sends the information to the control board. If your refrigerator is too warm or not cooling properly, you may need to replace the temperature sensor. This is a genuine OEM part. Please make sure to disconnect the power to the refrigerator before starting your repair.

Defrost thermostat (high limit thermostat for refrigerator or freezer defrost heater, l140-30f. This thermostat is normally closed for continuity at room temperature.)

This defrost thermostat acts as a safety device against over heating in case of mechanical failure.

Vegetable drawer - clear (vegetable drawer)

Sold individually. This is used in refrigerator to store vegetable and fruits at an optimal temperature

Dispenser door solenoid assembly (refrigerator solenoid assembly for dispenser door. If the dispense door does not close properly frost will start to form in the dispenser area.)

This part is a possible option when ice door won't open or shut properly or when water is not dispensing.

Dispenser door assembly or flapper (refrigerator ice dispenser damper door. The crank is no longer sold with the damper door. You will have to reuse the old crank.)

The ice chute door opens to dispense ice once activated. This part mounts in the ice dispenser. If it is too warm inside your refrigerator, there is frost build up, or your icemaker will not make or dispense ice, you may need to replace the ice chute door. The crank no longer comes with this part, but you can use the original crank. The crank is sold separately depending on the model number of your appliance. The ice chute door is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Defrost heater and bracket assembly (refrigerator defrost heater and bracket assembly.)

The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils.

Bucket auger (auger assembly, ice dispensing bucket)

The ice bucket auger is located within the ice bucket assembly in your freezer. It stirs and dispenses the ice in the bucket. You may need to replace the auger if your ice maker is noisy, or not dispensing ice. Disassembly of the ice bucket assembly is necessary to replace this part. Turn off power to the appliance before removing the ice bucket assembly to do this repair.

Refrigerator ice bucket and auger assembly (refrigerator ice bucket assembly. This ice bucket stores ice and uses an auger to push the ice through the dispenser. If the auger is defective, the i)

Drawer slide rail - right side (drawer rail slide assembly, right hand side)

This is the drawer slide rail or slide assembly for your refrigerator. You will find the drawer slide rail at the bottom of your refrigerator, mounted to the right-hand side of the cabinet wall. It is designed to hold the bottom shelf in place. You will want to make sure you are replacing the bottom rail, as the top one is a longer rail. The slide rail is held in place with two Phillips screws and is made of white plastic.

Dispenser crusher cover (cover, crusher housing, dispenser)

This part is white in color.

Dispenser light (refrigerator light bulb for the dispenser, 12 volts.)

This twelve volt dispenser light bulb is a little under two inches long.

Evaporator/condensor fan grommet (grommet cond fan)

The evaporator fan motor grommet provides a cushion between the fan motor and the motor mounting bracket. This part is made of black plastic and is approximately one inch in diameter. If your grommet is torn or damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer. Please remember to disconnect the power to the refrigerator before starting your repair.