Parts for Kenmore Models A4425GDTW

Evaporator fan motor (refrigerator evaporator fan motor. If your motor has a white thermistor in the connector you need the related fan motor 914169. If it has a connector)

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Note: Thermistor is NOT included. If you need the motor with the thermistor, see related parts.

Easy Part #:: EAP1019114

Availability:: In Stock

Price:: $99.34

Recess door spring (spring, recess door)

This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.

Easy Part #:: EAP285013

Availability:: In Stock

Price:: $11.16

Condenser fan motor (refrigerator condenser fan motor. The condenser fan motor draws air though the condenser coils and over the compressor.)

This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan.

Easy Part #:: EAP1766247

Availability:: In Stock

Price:: $47.46

Drawer slide rail - left side (drawer rail slide assembly, left hand side)

This drawer slide rail is for the left side of the refrigerator, and allows the bottom shelf to slide in and out. If your refrigerator door will not close, or the bottom drawer will not slide properly, you may need to replace the slide rail. Make sure the slide rail that is damaged on your refrigerator is on the left side before you select this part. The slide rail is made of white plastic and connects to the side of your refrigerator. It is sold individually, and is an OEM part sourced directly from the manufacturer.

Easy Part #:: EAP306945

Availability:: In Stock

Price:: $24.70

Lid bumper (bumper)

This orange rubber bumper prevents the condenser fan motor from bumping against the mounting bracket every time the fan motor starts. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side bracket on the evaporator fan motor assembly. It has a rounded top and a slightly pointed bottom. The bumper is a genuine OEM part and is sold individually.

Easy Part #:: EAP284979

Availability:: In Stock

Price:: $10.21

Union connector - 5/16 inch to 5/16 inch (quick connector for refrigerator water line, 5/16 to 5/16 inches.)

Quick connector for plastic water line - 5/16" to 5/16"

Easy Part #:: EAP758446

Availability:: In Stock

Price:: $8.41

Run capacitor (refrigerator run capacitor 12 uf. If this run capacitor is defective, the refrigerator will not run.)

The run capacitor is attached to the compressor and is 12 UF. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11764031

Availability:: In Stock

Price:: $61.14

Meat pan - clear (meat pan, clear)

This pan does not include the handle. Must order separately or use original.

Easy Part #:: EAP3487933

Availability:: In Stock

Price:: $81.38

Dispenser door recess crank (dispenser door crank)

The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips screwdriver. If your dispenser door will not close properly, or ice is not dispensing properly, you may have a damaged door recess crank. This part is made of white plastic and is sold individually.

Easy Part #:: EAP291908

Availability:: In Stock

Price:: $11.33

Condenser fans blade assembly (condenser fan blade)

The condenser fan blade assembly helps to regulate the temperature in your refrigerator or freezer. This fan assembly has 4 blades, but other fans may have 3 blades, so be sure to check the number of blades on your fan. The fan blade is made of white plastic and is approximately 6 inches in diameter. If your freezer section is too warm, or you notice a strange noise coming from your refrigerator when it is running, you may need to replace the condenser fan blade assembly. This part is sold individually.

Easy Part #:: EAP1022410

Availability:: In Stock

Price:: $9.35

Evaporator fan blade

This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. It is made of white plastic and is sold individually. If your refrigerator is noisy and you hear a clicking sound, it is a good indication that the evaporator fan blade is warped or damaged. If the fridge or freezer sections become too warm, the fan could be to blame as well.

Easy Part #:: EAP12730613

Availability:: In Stock

Price:: $57.16

Package of 12 screws (screws, pkg of 12.)

This is a package of twelve Phillips-head screws. They can be used as replacement screws in refrigerators, ice makers, or freezers. Be sure to check that your appliance model is compatible with these screws. The screws are approximately ¾ of an inch in length.

Easy Part #:: EAP312573

Availability:: No Longer Available

Front dispenser bucket auger nut (nut, auger, front dispenser bucket.)

Coarse thread

Easy Part #:: EAP652459

Availability:: In Stock

Price:: $14.69

Water inlet valve (water valve)

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.