Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

AEM497L2-PAEM497L2 Parts List

1-15 of 151

Drum support roller (dryer drum support roller. The rollers tend to wear at the same rate so both should be replaced while the dryer is apart.)

This single drum support roller is used for square-ported model clothes dryers. It has a metallic bearing in its center. This support roller is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. If your dryer is noisy, will not tumble, or takes too long to dry, you might need to replace the roller. It is recommended that you replace both rollers at once. It is sold individually.

Easy Part #:

EAP11741913

Availability:

In Stock

Price:

$16.51

Multi rib belt (dryer drum drive belt. Length 93 3/8”, width 3/8”, characteristics, 5 ridges, flat.)

This dryer drum belt has five ridges, 93-3/8 inches in length, and 3/8 of an inch wide. It is flat, black in color, and is made entirely of rubber. The belt helps rotate the drum. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP11742271

Availability:

In Stock

Price:

$12.30

Drum glide (dryer drum glide pad. Drum glides help to support the front of the dryer drum as it rotates. If the drum glides are worn out, the dryer will be noisy.)

The drum glide helps the front drum rotate smoothly and quietly while operating. If your dryer will not tumble or is noisy, the glide could be worn down, causing metal on metal noise. In this case, it will need to be replaced. It is recommended to replace both glides at the same time and two are required for the dryer. The drum glide is a genuine OEM part and is sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP11741931

Availability:

In Stock

Price:

$11.32

Thrust washer (washer. Has a 3/4-inch outside diameter.)

This part is located between the drum support rollers and idler pulley in your dryer to help prevent the parts from bumping up against the brackets they are attached to. If your dryer has a burning smell, is noisy, or will not tumble, you may need to replace the thrust washer. The washer is 3/4 inches in diameter and a is genuine OEM part. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:

EAP11740482

Availability:

In Stock

Price:

$4.54

Idler pulley wheel with bearing (idler pulley wheel and bearing assembly. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tensio)

This two-inch-wide idler pulley wheel is black in color and is made of plastic. This pulley wheel comes with its own metallic bearing in its center. This part helps maintains the correct tension on the drive belt to rotate the drum. The drum will not spin if the idler pulley fails to put the correct amount of tension on the belt. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:

EAP11757553

Availability:

In Stock

Price:

$15.60

High limit thermal fuse (dryer thermal fuse. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start)

Meant as a backup to a high limit thermostat, this fuse is typically set to trip at a higher temperature than that of a high limit thermostat. This is a one-time use fuse, so when it does trip, you do need to replace it. It's letting you know that something is wrong with your dryer.

Easy Part #:

EAP11742274

Availability:

In Stock

Price:

$12.77

Door catch kit (door catch kit, includes catch and clip (metal))

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close you may need to replace the door catch. This is a genuine OEM part and includes both the male (strike) and female (catch) pieces. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:

EAP2162263

Availability:

In Stock

Price:

$27.00

Dryer idler assembly (dryer idler pulley assembly. If the dryer drum does not turn check if the idler pulley is rotating freely and putting.)

The spring for this part is sold separately. This idler assembly is for dryers. Idler assembly includes the idler arm and the idler pulley that maintains tension on the drive belt, allowing the belt to turn. Disconnect the power before installing this part. Wear work gloves to protect your hands.

Easy Part #:

EAP11741930

Availability:

In Stock

Price:

$28.37

Retaining ring (retainer snap ring)

The retaining clip goes onto the end of the roller axle and holds the rear wheel onto the axle. If the ring is broken, damaged, making noises, or will not tumble, you will need to replace it. This is a genuine OEM part and is sold individually.

Easy Part #:

EAP11740487

Availability:

In Stock

Price:

$8.56

Screw, 8/18 x 3/8 (screw, 10-24 3/8)

This screw is sold individually.

Easy Part #:

EAP11746840

Availability:

In Stock

Price:

$6.52

Cylinder felt seal

The felt seal keeps the hot air in the dryer drum. It is located between the back of the drum and the rear dryer panel. If your dryer is noisy, or the seal is damaged, you will need to replace it. This is the seal only; the high temperature adhesive is not included. This is a genuine OEM part. Please make sure you disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP11741917

Availability:

In Stock

Price:

$39.89

Easy Part #:

EAP1964648

Availability:

In Stock

Price:

$20.17

Motor assembly - threaded shaft (dryer drum drive motor assembly with pulley. The pulley is not available separately from the motor assembly.)

This 1/4 horsepower gas or electric clothes dryer motor carries 120 volts, 60 Hz, and 5.5 amps. It also performs 1725 revolutions per minute. This motor is used for some gas and some electric clothes dryers.

Easy Part #:

EAP11739459

Availability:

In Stock

Price:

$100.56

Drum support roller and shaft assembly (drum support roller axle. *roller will be tight on new shaft. Gently tap roller onto new shaft with a hammer.)

This drum support roller bracket and shaft assembly is a little over two inches long. It is made of metal.

Easy Part #:

EAP11742273

Availability:

In Stock

Price:

$34.63

Spring retaining clip (front cover top retaining spring clip)

This spring retaining clip is used to hold the front panel onto the top of the washer. If your front panel is loose you might need to replace the clip. The clip is made entirely of metal and is used for some washing machines. This part is not quite an inch long and is sold individually. This is a genuine OEM part.

Easy Part #:

EAP11739294

Availability:

In Stock

Price:

$11.06

1-15 of 151