CSF22MVD Hotpoint Refrigerator Parts List

Light switch (refrigerator light switch. This switch activates the refrigerator light when the door is open. It also prevents the dispenser from working if the door)

The refrigerator light switch turns the interior light off and on when you open or close the refrigerator door. The light switch also prevents the front dispenser from working if the refrigerator door is opened. If the switch has shorted out or the light bulb is not turning on when the door is open, you may need to replace the switch. This switch is white in color and measures approximately 1 1/2” L x 1 1/4” W. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting the repair.

Defrost thermostat kit (defrost thermostat kit, 55 degrees)

This refrigerator defrost thermostat will cut out at 55 degrees F and kick back in when the temperature drops to 35 degrees F. It comes with connectors and the mounting brackets.

Evaporator fan blade kit (fan blade, plastic)

Condenser fan motor (condenser fan motor kit, ¼” spade terminal connection. *note: If original motor has a wire harness connection see related item below.)

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

Double outlet water valve (dual port water inlet valve for round cube icemaker with ice and water in door)

This double outlet valve has a garden hose thread for a tubing adapter, and is intended for use with refrigerators that have icemakers that make round ice cubes.

Heater and bracket kit (defrost heater kit, side by side)

NOTE: This it is just the heaters and the jumper wires between the two heaters.

Defrost timer (defrost timer assembly. Turn the dial on the timer clockwise to advance it into and out of defrost.)

This refrigerator defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, but its terminals are bent and the leads are external.

Fresh food door gasket (refrigerator door gasket, white {19 1/2"-60"})

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Temperature control thermostat (refrigerator thermostat control)

With refrigerators/freezers they have a thermostat that helps maintain the desire temperature.

Evaporator fan motor (evaporator (freezer) fan motor assembly)

This evaporator fan motor operates in a counter clockwise fashion. This motor's stack is 3/8 of an inch, and the motor has two terminals: one on the right side, and one on the left side. Use this evaporator fan motor for your GE brand refrigerator.

Ice maker seal kit (ice maker push kit with new shaft, seal and screw. *washer removal and seal install tools no longer available from GE)

This newly redesigned icemaker seal kit is used to rebuild the ice maker cube ejector. The kit comes with a new shaft, seal, and screw. General Electric no longer carries the washer removal and seal install tools. This seal kit is a genuine OEM part.

Cut to fit door gasket kit - gray (refrigerator/freezer door gasket kit, cut to length, gray)

This gray door gasket kit is cut to fit your refrigerator, though some assembly is required. Use it for your GE brand refrigerator.

Comp. Repl. Kit r-12 (replacement compressor kit)

Fan blade (condenser fan blade)

Relay