DBVH512EFW GE Dryer Parts List

1-15 of 98

Drum bearing slide - white (dryer drum slide. Sold individually. The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the)

This single white drum bearing slide attaches to the outer-most sides of the bearing to help support the front of the drum as it rotates. If your dryer is making loud noises or the drum will not tumble, you many need to replace the slides. The manufacturer recommends replacing both slides at the same time; there are 2 slides per dryer. This is a genuine OEM part. Please make sure to disconnect power to the dryer before starting your repair.

Easy Part #:

EAP755842

Availability:

In Stock - Ships Today

Price:

$8.30

Drum bearing slide Green (dryer drum slide. There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to p)

This single green drum bearing slide attaches to the outer-most sides of the bearing to help support the front of the drum as it rotates. If your dryer is making loud noises or the drum won?t tumble you many need to replace the slides. The manufacturer recommends replacing both slides at the same time. There are 2 slides per dryer. This is a genuine OEM part. Please make sure to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP6447706

Availability:

In Stock - Ships Today

Price:

$8.35

Duct felt seal (dryer drum seal for the lower front.)

The duct felt seal allows the front of the drum to glide smoothly on the exterior panel while the drum is rotating. The seal is located between the back of the drum and the rear dryer panel. If the heat is escaping from the drum area causing the dryer to run too long or if there are marks on your clothes you many need to replace the duct felt seal. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP9861764

Availability:

No Longer Available

Drive belt (dryer drum drive belt, 89-1/2 inches long, 4 ribs.)

This drive belt is about 89 1/2-inch long and has 4 ribs. This part is made to wrap around the drum, to rotate it. If your dryer drum will not turn, then you may need to replace your belt. It is recommended to disconnect the power to your dryer before you start your repair. This drive belt is a genuine OEM part.

Easy Part #:

EAP1766009

Availability:

In Stock - Ships Today

Price:

$23.91

Rear drum bearing kit (rear drum bearing kit. *bearing plate has slot in it for ground strap. The drum bearing supports the rear of the dryer drum. Over time, the drum beari)

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Over time the drum bearing will wear out, once it has the dryer may make some noise and the drum bearing will need to be replaced. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power to your appliance before starting your repair.

Easy Part #:

EAP267529

Availability:

In Stock - Ships Today

Price:

$52.69

Top bearing (dryer top bearing retainer for dryer drum. If the dryer is noisy then this glide retainer and the glides are probably worn.)

The drum slides are not included with this part. The top bearing helps your dryer operate as quietly as possible. This part will require two green drum slides and 2 white drum slides.

Easy Part #:

EAP1766010

Availability:

On Order

Price:

$56.51

Idler pulley wheel (dryer idler pulley wheel. If the pulley wheel is worn down, it may cause the dryer to be excessively noisy.)

The idler pulley helps maintain the proper amount of tension on the drive belt to turn the drum. The idler pulley is located between the motor pulley and drum to provide tension on the belt. If the part has become worn, it could cause the dryer to be noisy or squeaky, and the pulley will need to be replaced. This part is yellow in color, made of plastic, and measures approximately 2 1/2” in diameter. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

Easy Part #:

EAP265721

Availability:

In Stock - Ships Today

Price:

$21.82

Easy Part #:

EAP266777

Availability:

In Stock - Ships Today

Price:

$12.76

Light bulb

This 10W - 120V light bulb is used on the inside of your dryer to provide light when the door is open. It is clear in color and has a standard screw-in base. If your current bulb is burnt out or broken you will need to replace it. This bulb is a genuine OEM part and is sold individually.

Easy Part #:

EAP10063224

Availability:

In Stock - Ships Today

Price:

$5.86

Easy Part #:

EAP265565

Availability:

In Stock - Ships Today

Price:

$141.40

Retainer o-ring (o ring)

This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-ring is made of rubber, and can occasionally wear down and break. If you notice that your dryer drum bearing is worn while you’re replacing the O-ring, you should consider replacing it as well. This product is sold individually, and is an OEM part from the manufacturer.

Easy Part #:

EAP266776

Availability:

In Stock - Ships Today

Price:

$3.99

Door latch (dryer door catch kit)

This part helps to keep the door closed while the machine is running.

Easy Part #:

EAP3502777

Availability:

In Stock - Ships Today

Price:

$4.06

Door switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Easy Part #:

EAP2344321

Availability:

In Stock - Ships Today

Price:

$20.39

Adjustable leveling screw (leveling leg, adjustable)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able to create a level base for your dryer. The leveling screw has a hexagon-shaped gray plastic foot, with a screw that is approximately 1 inch in length. To replace a damaged screw, simply turn the old screw to the left, until it can be removed. Then, simply screw the new leveling screw into place on the bottom of the dryer, making sure it is the same height as the other 3 leveling screws.

Easy Part #:

EAP1021358

Availability:

In Stock - Ships Today

Price:

$5.74

Easy Part #:

EAP267755

Availability:

In Stock - Ships Today

Price:

$4.06

1-15 of 98