Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

DBVH512GFG GE Dryer Parts List

1-15 of 104

Drum bearing slide - white (dryer drum slide. Sold individually. The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the)

This single white drum bearing slide attaches to the outer-most sides of the bearing to help support the front of the drum as it rotates. If your dryer is making loud noises or the drum will not tumble, you many need to replace the slides. The manufacturer recommends replacing both slides at the same time; there are 2 slides per dryer. This is a genuine OEM part. Please make sure to disconnect power to the dryer before starting your repair.

Easy Part #:

EAP755842

Availability:

In Stock

Price:

$10.96

Drum bearing slide Green (dryer drum slide. There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to p)

This single green drum bearing slide attaches to the outer-most sides of the bearing to help support the front of the drum as it rotates. If your dryer is making loud noises or the drum won?t tumble you many need to replace the slides. The manufacturer recommends replacing both slides at the same time. There are 2 slides per dryer. This is a genuine OEM part. Please make sure to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP6447706

Availability:

In Stock

Price:

$8.41

Duct felt seal (dryer drum seal for the lower front.)

The duct felt seal allows the front of the drum to glide smoothly on the exterior panel while the drum is rotating. The seal is located between the back of the drum and the rear dryer panel. If the heat is escaping from the drum area causing the dryer to run too long or if there are marks on your clothes you many need to replace the duct felt seal. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP9861764

Availability:

No Longer Available

Belt drive (dryer drum drive belt, 89-1/2 inches long, 4 ribs.)

This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley, allowing all the parts to work together, spinning the drum as the motor rotates. If the drum will not turn when the dryer is turned on the belt is likely broken. It is common for belts to stretch or become brittle over time, which is what leads to the breakage. If broken, it should be replaced; the drum simply cannot spin without this belt. Refer to your model number and user manual to check if this part is right for you. Ensure you use work gloves to protect your hands from sharp internal parts during this repair. Please note: When comparing the length of your old belt to the length of the belt as stated here, remember that a small amount of stretching and contortion may occur with belts over time for a range of different reasons. Unless your belt is drastically different in length, this belt is what you are looking for despite any small inaccuracies. You will need to remove power to your appliance, remove the main panel, and access the motor drive to slip your new belt back into place.

Easy Part #:

EAP16542496

Availability:

In Stock

Price:

$28.25

Rear drum bearing kit (rear drum bearing kit. *bearing plate has slot in it for ground strap. The drum bearing supports the rear of the dryer drum. Over time, the drum beari)

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Over time the drum bearing will wear out, once it has the dryer may make some noise and the drum bearing will need to be replaced. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power to your appliance before starting your repair.

Easy Part #:

EAP267529

Availability:

In Stock

Price:

$58.95

Light bulb

This 10W - 120V light bulb is used on the inside of your dryer to provide light when the door is open. It is clear in color and has a standard screw-in base. If your current bulb is burnt out or broken you will need to replace it. This bulb is a genuine OEM part and is sold individually.

Easy Part #:

EAP10063224

Availability:

In Stock

Price:

$12.05

Top bearing (dryer top bearing retainer for dryer drum. If the dryer is noisy then this glide retainer and the glides are probably worn.)

The drum slides are not included with this part. The top bearing helps your dryer operate as quietly as possible. This part will require two green drum slides and 2 white drum slides.

Easy Part #:

EAP1766010

Availability:

On Order

Price:

$68.85

Idler pulley wheel (dryer idler pulley wheel. If the pulley wheel is worn down, it may cause the dryer to be excessively noisy.)

The idler pulley helps maintain the proper amount of tension on the drive belt to turn the drum. The idler pulley is located between the motor pulley and drum to provide tension on the belt. If the part has become worn, it could cause the dryer to be noisy or squeaky, and the pulley will need to be replaced. This part is yellow in color, made of plastic, and measures approximately 2 1/2” in diameter. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

Easy Part #:

EAP265721

Availability:

In Stock

Price:

$31.56

Easy Part #:

EAP266777

Availability:

In Stock

Price:

$17.93

Retainer o-ring (o ring)

This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-ring is made of rubber, and can occasionally wear down and break. If you notice that your dryer drum bearing is worn while you’re replacing the O-ring, you should consider replacing it as well. This product is sold individually, and is an OEM part from the manufacturer.

Easy Part #:

EAP266776

Availability:

In Stock

Price:

$6.14

Door latch (dryer door catch kit)

This part helps to keep the door closed while the machine is running.

Easy Part #:

EAP3502777

Availability:

In Stock

Price:

$8.20

Door switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Easy Part #:

EAP2344321

Availability:

In Stock

Price:

$23.56

M-series primary dual coil gas valve (gas valve solenoid coil 3 terminal)

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.

Easy Part #:

EAP268153

Availability:

In Stock

Price:

$32.59

Adjustable leveling screw (leveling leg, adjustable)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able to create a level base for your dryer. The leveling screw has a hexagon-shaped gray plastic foot, with a screw that is approximately 1 inch in length. To replace a damaged screw, simply turn the old screw to the left, until it can be removed. Then, simply screw the new leveling screw into place on the bottom of the dryer, making sure it is the same height as the other 3 leveling screws.

Easy Part #:

EAP1021358

Availability:

In Stock

Price:

$7.74

Igniter (gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally)

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.

Easy Part #:

EAP12342916

Availability:

In Stock

Price:

$43.25

1-15 of 104