Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

GFD43GSSM1WW GE Dryer Parts List

1-15 of 109

Belt drive

This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley, allowing all the parts to work together, spinning the drum as the motor rotates. If the drum will not turn when the dryer is turned on the belt is likely broken. It is common for belts to stretch or become brittle over time, which is what leads to the breakage. If broken, it should be replaced; the drum simply cannot spin without this belt. Refer to your model number and user manual to check if this part is right for you. Ensure you use work gloves to protect your hands from sharp internal parts during this repair. Please note: When comparing the length of your old belt to the length of the belt as stated here, remember that a small amount of stretching and contortion may occur with belts over time for a range of different reasons. Unless your belt is drastically different in length, this belt is what you are looking for despite any small inaccuracies. You will need to remove power to your appliance, remove the main panel, and access the motor drive to slip your new belt back into place.

Easy Part #:

EAP16542496

Availability:

In Stock

Price:

$28.25

Light bulb (lamp)

This 10W - 120V light bulb is used on the inside of your dryer to provide light when the door is open. It is clear in color and has a standard screw-in base. If your current bulb is burnt out or broken you will need to replace it. This bulb is a genuine OEM part and is sold individually.

Easy Part #:

EAP10063224

Availability:

In Stock

Price:

$12.05

Easy Part #:

EAP266777

Availability:

In Stock

Price:

$17.93

Interlock switch (switch interlock)

This switch is multi purpose, for a dishwasher the switch is a simple on/off mechanism that prohibits the appliance from operating when the door is open. For a dryer, this switch will let the dryer know if the belt breaks and shut power off to the dryer. If your dryer will not operate or your dishwasher will not start you may need to replace the switch. This is a genuine OEM part. Please remember to disconnect the power to your appliance before starting your repair.

Easy Part #:

EAP1481922

Availability:

In Stock

Price:

$19.04

Retainer o-ring (o ring)

This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-ring is made of rubber, and can occasionally wear down and break. If you notice that your dryer drum bearing is worn while you’re replacing the O-ring, you should consider replacing it as well. This product is sold individually, and is an OEM part from the manufacturer.

Easy Part #:

EAP266776

Availability:

In Stock

Price:

$6.14

Door latch (latch)

This part helps to keep the door closed while the machine is running.

Easy Part #:

EAP3502777

Availability:

In Stock

Price:

$8.20

Door switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Easy Part #:

EAP2344321

Availability:

In Stock

Price:

$23.56

Slide bearing (bearing slide)

This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums will scrape against metal during the drying cycle which will produce a squealing, or scraping sound.

Easy Part #:

EAP3505464

Availability:

No Longer Available

Adjustable leveling screw (levelling screw gray)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able to create a level base for your dryer. The leveling screw has a hexagon-shaped gray plastic foot, with a screw that is approximately 1 inch in length. To replace a damaged screw, simply turn the old screw to the left, until it can be removed. Then, simply screw the new leveling screw into place on the bottom of the dryer, making sure it is the same height as the other 3 leveling screws.

Easy Part #:

EAP1021358

Availability:

In Stock

Price:

$7.74

Igniter

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.

Easy Part #:

EAP12342916

Availability:

In Stock

Price:

$43.25

Easy Part #:

EAP1482128

Availability:

In Stock

Price:

$231.29

Natural gas to liquid propane conversion kit (lp conversion kit)

This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.

Easy Part #:

EAP267591

Availability:

In Stock

Price:

$57.64

Felt trap duct

May differ in appearance but functions same as original.

Easy Part #:

EAP12722961

Availability:

In Stock

Price:

$5.92

Heat detector (detector asm)

Also known as Flame Sensor/Detector.

Easy Part #:

EAP268031

Availability:

In Stock

Price:

$75.11

Easy Part #:

EAP1017595

Availability:

In Stock

Price:

$6.32

1-15 of 109