LDF7774ST LG Dishwasher Parts List

Roller with axle (dishwasher dishrack roller assembly, upper)

The rack roller with axle attaches to the upper rack to allow you to move the dishrack in and out with ease along the support rails. The rollers and axles sometimes wear out at the same rate and the manufacturer recommends replacing the axles in pairs. This part is gray in color, made of plastic, and measures 1 1/2” wide. This is a genuine OEM part and is sold individually.

Hinge cable (dishwasher door hinge cable)

The door hinge cable works in conjunction with the dishwasher door by connecting the door hinge to the door spring and helping to support and balance the weight of the door as you open and close it. If your dishwasher door isn’t closing properly you will need to replace this part. This part measures approximately 12” and is black and white in color. This is a genuine OEM part.

Roller assembly (dishwasher dishrack roller, lower)

The lower rack roller and axle attaches to the rack and allows you to slide the lower dish rack in and out smoothly. If a roller becomes damaged or broken it will need to be replaced. This part measures approximately 2 1/2” in diameter, gray in color, made from plastic, and is sold individually. This is a genuine OEM part.

Spring,hinge (dishwasher door spring)

The door spring is used to help support and balance the weight of the dishwasher door as it open and closes. The door hinge measures a little over 10” long and made of metal. If the dishwasher door feels heavy, or is noisy when opening or closing , you may need to replace this part. This is a genuine OEM part and is sold individually.

Holder

Drain pump assembly (dishwasher drain pump)

This drain pump assembly is a genuine OEM replacement part for your dishwasher. In order to complete this repair you will need a Phillips screwdriver, pliers, and a socket. You will need to pull the dishwasher out from the cabinet and lay it on its back in order to access through the bottom and replace the drain pump.

Door gasket - black (dishwasher tub gasket)

Nozzle assembly

Basket assembly,spoon (dishwasher silverware basket)

Rack assembly (dishwasher rack)

Dishwasher drain hose

Dishrack assembly (rack)

Dishwasher water inlet valve

This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.

Diverter motor - 120v 60hz (dishwasher pump motor)

The diverter motor works in conjunction with the spray arms in your dishwasher by controlling the flow of water to the spray arms. The motor turns the check valve inside the pump to avert the flow of water between the drain pump and the spray arms. If the motor fails it will cause the dishwasher not to wash or drain and will need to be replaced. This diverter motor is 120 volts and 60 Hz. Please remember to disconnect the power and water supply to the dishwasher before starting the repair. This is an authorized OEM part.

Rack