Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

MDB9206AWW Maytag Dryer Parts List

1-15 of 22

Drum support roller kit (dryer drum support roller kit. Includes two washers. When the drum rollers are worn out, they can cause the dryer to make a loud rumbling noise.)

This drum support roller includes one drum roller and two washer bearings. The drum support roller holds the drum in place while the drum rotates on the support wheels. If the dryer is making a loud rumbling noise or will not tumble, you may need to replace the roller. Most dryers use two drum rollers, and it is recommended to change both at once. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

Easy Part #:

EAP1570070

Availability:

In Stock

Price:

$22.77

M series new style coil kit (dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective.)

This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If there is no heat or your drying time is getting longer, the coils may be bad and will need to be replaced. Once the coils go bad they do not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP334310

Availability:

In Stock

Price:

$22.74

Multi rib belt - 91-5/8 inches (dryer drive belt. The belt has a length of 91 5/8” and width 5/16”. The belt has 5 ridges. If the dryer drum won’t rotate, but the motor is running th)

At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.

Easy Part #:

EAP11741110

Availability:

In Stock

Price:

$21.58

Lint filter (dryer lint filter. This filter should be cleaned before every load to ensure proper airflow for dryer operation. If the lint filter is ripped or torn,)

This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and three quarter inches wide. This is a white filter and the screen is made of white nylon mesh.

Easy Part #:

EAP11741075

Availability:

In Stock

Price:

$44.46

Idler pulley wheel and bearing (idler pulley wheel and bearing. If the idler pulley wheel and/or bearing is defective, it may cause the dryer to be excessively noisy.)

This idler pulley wheel is white and made of plastic. It is two inches in diameter and comes with a center bearing.

Easy Part #:

EAP11743032

Availability:

In Stock

Price:

$20.10

Flat style igniter (dryer igniter with wire harness connecter. This is a flat-style igniter. The igniter uses heat to ignite the gas in the burner assembly.)

This flat style igniter comes with a wire harness connector. This part ignites the gas within the dryer. Bracket is NOT included.

Easy Part #:

EAP373025

Availability:

In Stock

Price:

$30.16

Dryer radiant flame sensor (gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly.)

This part senses if the igniter is hot enough to ignite the flame for heat, allowing the gas valve to open. The sensor is three inches long and is used for many gas clothes dryers. If your dryer is not creating any heat, taking too long to dry or shuts off too soon, you may need to replace the flame sensor. This is a genuine OEM part and is made of both plastic and metal. Please remember to disconnect power to your dryer before starting your repair.

Easy Part #:

EAP11741429

Availability:

In Stock

Price:

$32.53

Door catch kit (door catch kit, includes catch and clip (metal))

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close you may need to replace the door catch. This is a genuine OEM part and includes both the male (strike) and female (catch) pieces. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:

EAP2162263

Availability:

In Stock

Price:

$27.00

Easy Part #:

EAP1964648

Availability:

In Stock

Price:

$20.17

Door latch kit (dryer door catch kit. Includes door catch and clip (plastic))

This dryer door latch kit comes in two pieces: a door latch, and a door strike. It's used to help hold your door shut to your dryer.

Easy Part #:

EAP2029855

Availability:

In Stock

Price:

$5.59

Drive motor - 115v

This part has a D-shaped motor shaft and this motor runs at 1/4 horsepower and carries 4.5 amps.

Easy Part #:

EAP3500892

Availability:

In Stock

Price:

$112.57

Rubber leveling leg foot pad (rubber leveling leg foot.)

This gray levelling leg foot pad is made of rubber and is just over an inch in diameter. Sold individually.

Easy Part #:

EAP11757547

Availability:

In Stock

Price:

$6.13

Timer knob base (timer knob base, requires insert - order separately.)

This timer knob is not quite three inches in diameter. It is all gray in color and it is made entirely of plastic. This has a D-Shaped Shaft.

Easy Part #:

EAP11739297

Availability:

In Stock

Price:

$23.22

High limit thermostat (dryer high-limit thermostat, l220-40f. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element.)

This high limit thermostat is about an inch and a half long. This thermostat will cut out when the internal temperature of your dryer reaches 240 degrees Fahrenheit, and cut back in when the temperature drops forty degrees.

Easy Part #:

EAP11740646

Availability:

In Stock

Price:

$23.58

Thermal fuse (limit: 183) (dryer thermal fuse. Located on the blower housing. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element.)

This thermal fuse mounts on your dryer's blower wheel housing. It will cut out once your dryer's internal temperature reaches around 183 degrees Fahrenheit, and will not cut in again. Like a house fuse, you will have to replace it when it blows. Use it for your Maytag brand gas or electric clothes dryer.

Easy Part #:

EAP11741067

Availability:

In Stock

Price:

$38.52

1-15 of 22