YKMHC319EB1 KitchenAid Microwave Parts List

Light bulb - 40w

This part is the exterior replacement light bulb, with a small screw base, for your microwave. If your light bulb is burnt out, it will not be able to do this, and will need to be replaced. Before you change the bulb, be sure to check that the light socket still works, as it may need to be replaced as well. This bulb is 40 watts, is sold individually and is a genuine OEM part. Remember to disconnect the microwave from the power source before you begin this repair.

Charcoal filter

The charcoal filter is used to eliminate odors while cooking from that air that circulates through the vent. The filter measures approximately 5-inch by 5-inch and is sold individually. This is a genuine OEM part.

Microwave surface light bulb

This halogen light bulb can be used to light up the surface below your microwave or brighten the interior of the microwave once the door has been opened. If your light bulb is burnt out, it will not be able to do this, and will need to be replaced. Before you change the bulb, be sure to check that the light socket still works, as it may need to be replaced as well. This bulb is 25 watts, 120 volts, is sold individually and is a genuine OEM part. Remember to disconnect the microwave from the power source before you begin this repair.

Top mounting screw (part: Wp8169704)

This screw is sold individually.

Mounting plate

Door switch - 3 terminal

This three-terminal switch is located behind the front panel of your microwave. When the door closes it will make contact with the door hook and allow the microwave to turn on. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heating properly, will not turn on or if it runs for a few seconds but turns off. This door switch is a genuine OEM part. It is recommended to disconnect the power to your microwave before you start your repair.

Microwave glass turntable tray (microwave turntable tray)

The turntable tray rotates in the centre of the microwave to help ensure the food cooks evenly.

Microwave door interlock switch

This door interlock switch is for microwaves. Door interlock switch prevents the microwave from starting when the door is open. Because the microwave shielding and interlock switches must be properly tested following the door interlock switch replacement, a service technician should install this part.

Fuse

The fuse protects the microwave by shutting it off if there is an electrical surge. If your microwave is not turning on you may need to replace the fuse. This part is just over an inch long, is metallic on both ends, and ceramic in the middle. This is a genuine OEM part. Please remember to disconnect power to your microwave before starting your repair.

Drive coupling

This glass tray drive coupling, also known as a tray support, is a genuine OEM replacement part. It can help solve the issue of your microwave tray not turning properly. This motor couple connects the motor to the turntable. To replace this part, make sure the microwave is unplugged first. Remove the glass tray, and the existing coupling. Insert the new coupling into the motor shaft.

Damper

This assembly includes the damper door and frame.

Diode

This part allows power to go one way but not the other.

Grease filter

INCLUDES ONE FILTER

Microwave turntable motor (part: Wpw10466420)

As per manufacturer this no longer comes with the Spacer.

Top interlock support