Whirlpool Range Switches

Surface Burner Element Switch, Large Burner

11 Reviews

Part Number: WP3149400

This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.

Dual Element Control Switch

5 Reviews

Part Number: WPW10434452

This switch controls the stove top surface burner.

Infinite Switch - 8 Inch

2 Reviews

Part Number: WP3148953

This switch controls the stovetop surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Lid Switch

1 Review

Part Number: W10820036

The door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open. The dryer cannot operate until the door switch signals that the door is closed. If your dryer will not start or the switch shorted out, your washer will not operate and the switch will need to be replaced. This switch is a genuine OEM part. Please remember to disconnect power to the dryer before starting the repair.

Infinite Control Switch, 6"

Part Number: WP3149404

This switch controls the stove top 6" surface burner.

Range Infinite Burner Switch - 8 Inch

2 Reviews

Part Number: WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Infinite Switch

Part Number: WP9758060

This switch controls the stove top surface burner.

Infinite Switch - 6 Inch

2 Reviews

Part Number: WP3148952

This part carries 5.2-6.6 amps.

Infinite Switch - Left Front - Single Element

Part Number: WPW10167742

This switch controls the stove top surface burner.

Switch, Infinite (Left Front)

Part Number: WP9761048

This switch controls the stove top surface burner.