Most Popular Parts
These are the most commonly purchased repair parts for A210S.
-
(6)
There are two belts under a Maytag washer; one for the main drive pulley and one for the water pump. The belt kit includes both the drive belt and the pump belt which are both V-shaped. The belt connects the drive motor to the drive system to be able to spin the tub basket. If your washer will not agitate, not spin, or not drain, the belt could be worn or damaged and will need to be replaced. This is a genuine OEM kit. Please remember to disconnect the power and shut off the water supply to your washer before starting your repair.
-
(2)
For drain hose 7/8".
-
This helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.
-
(3)
This washing machine drain pump is intended for use with automatic washers that have been manufactured since 1958. The pump itself is made of plastic, though it does come with a metallic belt pulley.
-
(3)
This water inlet valve has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor. The water inlet valve controls the water flow into your washer. If your washer is leaking, will not fill with water, has no hot/cold water, or will not stop filling with water, you may need to replace the valve. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before you start the repair.
-
(1)
The brake assembly aids in the spinning or agitating cycles. The brake keeps the spin basket stationary during agitation while the basket stops at the end of the spin cycle. If your washer is making a loud squeaky sound or not spinning, you might need to replace the brake assembly. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to your appliance before starting your repair.