Most Popular Parts
These are the most commonly purchased repair parts for KBLS19KTSS5.
-
(7)
Door switch turns the light off when you close the door.
-
(26)
This is the center support rail for the crisper drawers. The rail attaches to the shelf frame between the two crisper drawers to provide support for the drawers as they slide in and out. The support rail is white in color and made of plastic. It measures approximately 13.5-inches in length and is a genuine OEM part.
-
(1)
This part turns on the light when the door is opened.
-
(2)
This board will need to be programmed upon installation. The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem. The tools needed for this installation project is a small flat blade screwdriver. *Please note: the board will need to be programmed after installation. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.
-
(1)
This kit comes with the icemaker, bucket, valve, tubing and necessary hardware for replacement.
-
(1)
This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.