Hotpoint Range Igniters

Flat Style Oven Igniter Kit

15 Reviews

Part Number: WB13K21

The flat style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, then your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter please be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3-3/4" in length and the amperage range is 3.3 to 3.6. The kit comes with a mounting bracket and a wire connector with a plug. *Please note: the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. This is a genuine OEM part.

Round Style Oven Igniter

12 Reviews

Part Number: WB2X9154

The round style oven igniter ignites the gas to light the oven burner to produce heat for your range. The igniter measures approximately 3 1/2” in length and the amperage range is 2.5 to 3.0. If the element has shorted out, no longer glowing, or glowing but only orange or red when it needs to be white, you will need to replace the oven igniter. When replacing the igniter please be very careful not to touch the gray element part of the igniter as it is very fragile. This igniter can replace igniters for either the broil or bake burners; it does not replace the flat-style igniters. The igniter includes two high-temperature wire connectors. This is a genuine OEM part. Please make sure to disconnect the power and shut off the gas supply before starting your repair.

IGNITER GLOWBAR

1 Review

Part Number: WB13X25261

Surface Burner Spark Electrode

Part Number: WB13K18

This part helps your burner ignite and produce flame.

Burner Bake Tube

2 Reviews

Part Number: WB16K10043

This item no longer comes with the igniter.

Oven Igniter

Part Number: WB2X9998

Be very careful to not touch the black element part of this igniter as it is very fragile.

Burner with Igniter

2 Reviews

Part Number: WB16K10035

The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.

ELECTRODE TOP

Part Number: WB13K10021

ELECTRODES & HARNESS HV

Part Number: WB18K10098

Top Burner Spark Electrode

1 Review

Part Number: WB13K10014

The spark electrode helps create a spark to ignite the burner to produce the flame for cooking. If your gas igniter glows but will not light, you may need to replace this part. Please remember to disconnect the power and the gas supply to the range before you start your repair. This is a genuine OEM part and is sold individually.