Parts for Kenmore Models 10655612400

Screw

Sold individually.

Easy Part #:: EAP11742758

Availability:: In Stock

Price:: $12.45

Ice auger motor shaft (drive shaft)

This part is the drive shaft for the auger.

Easy Part #:: EAP11739142

Availability:: In Stock

Price:: $56.23

This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ice bucket. If the seal is broken, water and condensation can get in, causing the ice maker to fail. To replace the seal, first remove the ice bucket from your freezer. Then remove the two screws on the drive shaft holder, and use a pair of pliers to remove the drive shaft. At this point you can remove the seal from the drive shaft. Be sure to clean the area that the seal sits in before you reinstall the drive shaft. This part is white in color and is about an inch in diameter. The seal is sold individually.

Easy Part #:: EAP11739241

Availability:: In Stock

Price:: $13.57

Water fill cup and bearing (bearing & inlet)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:: EAP11743318

Availability:: In Stock

Price:: $33.67

Ice mold (mold & heater assembly (also order 542638 silicone grease))

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:: EAP11749915

Availability:: On Order

Price:: $129.08

Screw

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:: EAP11742721

Availability:: In Stock

Price:: $7.37

Ice dispenser door chute (door, ice)

*Please note, this door chute is no longer being manufactured with a heater.

Easy Part #:: EAP11739035

Availability:: In Stock

Price:: $14.83

Evaporator fan blade (fan blade)

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

Easy Part #:: EAP11738973

Availability:: In Stock

Price:: $31.00

Water filter housing (housing, water filter)

This part does NOT include the water filter. Must order filter separately. his water filter housing is for refrigerators. Water filter housing holds the water filter and connects the water lines to the water filter. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Easy Part #:: EAP11748615

Availability:: In Stock

Price:: $72.94

Filter inlet water tube (tube, filter inlet)

As per the manufacturer, this part starts out as 1/4" tubing but ends up at 5/16".

Easy Part #:: EAP886401

Availability:: In Stock

Price:: $37.80

Icemaker motor kit (module assembly (includes items 37 & 38))

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

Easy Part #:: EAP733947

Availability:: In Stock

Price:: $91.53

Screw

This screw is sold individually.

Easy Part #:: EAP11742755

Availability:: In Stock

Price:: $12.18

Compressor start relay (start-device, combination (start relay and overload) for production compressor only)

NOTE: This part has been replaced by the manufacturer. It may look different from the original but will still function the same. This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

Easy Part #:: EAP11740412

Availability:: In Stock

Price:: $74.74

Flipper

This part is a replacement flipper or emitter cover for your refrigerator. It is made of white plastic and is approximately 3 inches by 2 inches. The flipper shields the emitter control board and houses the flipper cover for the emitter board. If your flipper is broken or missing, your ice maker may not make or dispense ice, and will need to be replaced. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.