Parts for Kenmore Models 10670102000

Bimetal defrost thermostat (bimetl-def)

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

Easy Part #:: EAP11742474

Availability:: In Stock

Price:: $38.80

End cap trim - white (endcap trim)

This part is the replacement end cap trim for your refrigerator. It is made of white plastic and is approximately 1 inch wide, 1 inch long, and ½ inch thick. This part can also be known as the shelf support retainer as it holds the shelf support in place. If the end cap trim is damaged, the shelf support may not remain in place and you will not be able to store items in your refrigerator door. To replace the end cap trim, carefully disconnect it from both the refrigerator door and the shelf support. Then, snap the new end cap trim into the shelf support and then to the door. This part is sold individually and is an authentic OEM part.

Easy Part #:: EAP11738929

Availability:: In Stock

Price:: $10.30

Crisper cover frame (cover)

This is just the frame. The glass is sold separately.

Easy Part #:: EAP11740350

Availability:: In Stock

Price:: $107.26

Screw

Sold individually.

Easy Part #:: EAP11742758

Availability:: In Stock

Price:: $12.45

Micro switch (swtch-micr)

This switch is located inside the dispenser.

Easy Part #:: EAP11738948

Availability:: In Stock

Price:: $19.47

Screw

Sold individually.

Easy Part #:: EAP11742744

Availability:: In Stock

Price:: $7.40

Door shelf trim (door trim)

Also known as door retainer bar. End caps are not included. White in color. Part needs to be cut to proper length.

Easy Part #:: EAP11739547

Availability:: In Stock

Price:: $52.01

Water fill cup and bearing (fill cup)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:: EAP11743318

Availability:: In Stock

Price:: $33.67

Ice mold

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:: EAP11749915

Availability:: On Order

Price:: $129.08

Water tube kit (water tube)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Easy Part #:: EAP11730901

Availability:: In Stock

Price:: $30.10

Refrigerator door gasket - beige (gasket panel)

This misty beige door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Easy Part #:: EAP323895

Availability:: In Stock

Price:: $105.46

Spray paint - 12 oz. - white (spray)

Spray paint is designed to help cover up any scratches or chips on your appliances. This spray pant is white in color and comes in a 12 oz aerosol can. Please make sure to clean the area that requires touch up to avoid any old paint or dirt getting into the fresh paint. When using the spray paint it is recommended to wear gloves and a protective mask. Make sure to shake the can well before using and to spray a few inches away from the surface for best results. Please wait until the paint is dried before using the appliance. This is a genuine OEM part.

Easy Part #:: EAP347819

Availability:: In Stock

Price:: $18.90

Cycling thermostat (thermostat)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.