10670528900 Kenmore Refrigerator Parts List

Icemaker motor kit (motor mold)

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

Water tube kit (water tube)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Refrigerator door shelf rail (door trim)

Cycling thermostat (thermostat)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Screw

Sold individually.

Door shelf trim - narrow (door trim)

This door shelf trim snaps into place on the door to hold items on the door shelf. This genuine OEM door shelf trim is approximately 22 inches long and made of white plastic.

Light socket kit (light socket)

The bulb is sold separately.

Compression nut (nut-compre)

This single 1/4-inch compression nut is used to connect the lines that supply water to the correct components, the water dispenser and the ice maker, with the plastic water line of the icemaker assembly. This is a genuine OEM part. Please remember to disconnect the power and water supply to the refrigerator before starting your repair.

Door trim

This part is the door trim, also known as the door shelf bar, and it is built for your refrigerator. It is made of clear plastic and is approximately 26 inches wide and 5 inches deep. It is made of clear plastic, and allows food and beverages items to stay in the freezer door shelf. If your current door shelf bar is broken or missing, you will need to replace it. Many of our customers have rated this repair as easy. Simply lift out the old bar and replace it with a new one. Be sure you can properly close your refrigerator door after the repair is complete.

Shelf glass insert (shelf glass)

Glass shelf insert for a refrigerator bin.

Door hinge nylon washer (washer)

Insert (washer)

Refrigerator compressor start relay (start-dev)

This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.

Heater, defrost (heater)

The defrost heater is similar to the burners on an electric stove. It's located just beneath the cooling coils, which are concealed behind a panel in the freezer compartment. The heater gets hot. And, because it's close to the cooling coils, any ice or frost build-up melts.

Fresh food door gasket - white (gasket panel)

This door gasket is used to make an air-tight seal for the cabinet when the door is closed