11026051690 Kenmore Washer Parts List

Search the entire 11026051690 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Foot, front - single (foot, leveling)

The adjustable leveling leg is used to support and keep your washer level. It also allows you to adjust the height of your washer. If your washer is shaking, vibrating, or moving during operation you may need to replace this part. This part has a rubber foot, almost 3” long and is made of metal and rubber. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11747965
Availability:
In Stock
Price:
$6.94

Touch-up paint - white (tuchup)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:
EAP385132
Availability:
In Stock
Price:
$7.07

Lid hinge mounting screw

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

Easy Part #:
EAP11748588
Availability:
In Stock
Price:
$9.83

Drain hose (connector)

It connects from the pump to the back panel. The clamp is not included.

Easy Part #:
EAP11753688
Availability:
In Stock
Price:
$31.95

Hose clamp (clamp)

This hose clamp expands from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag washing machines to secure the end of the drain hose to the pump drain port. Please make sure to disconnect the power to your washer before you start your repair. This hose clamp is a genuine OEM part and is sold individually.

Easy Part #:
EAP11743008
Availability:
In Stock
Price:
$6.64

Tub wear pads - package of 3 (pad-suspen)

This package of pads contains three tub wear pads.

Easy Part #:
EAP334620
Availability:
In Stock
Price:
$15.68

Suspension spring retainer (retainer, suspension spring)

This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.

Easy Part #:
EAP11749057
Availability:
In Stock
Price:
$6.88

Clutch lining kit (clutch band kit)

This kit comes with springs, hardware, and brake lining.

Easy Part #:
EAP334642
Availability:
In Stock
Price:
$48.51

Tub-to-pump hose kit (hose)

This kit comes with the clamps.

Easy Part #:
EAP334685
Availability:
In Stock
Price:
$19.37

Cover screw (screw)

Sold individually.

Easy Part #:
EAP11740701
Availability:
In Stock
Price:
$7.40

Leveling spring

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

Easy Part #:
EAP394983
Availability:
In Stock
Price:
$10.37

Spray paint - 12 oz. - white (spray)

Spray paint is designed to help cover up any scratches or chips on your appliances. This spray pant is white in color and comes in a 12 oz aerosol can. Please make sure to clean the area that requires touch up to avoid any old paint or dirt getting into the fresh paint. When using the spray paint it is recommended to wear gloves and a protective mask. Make sure to shake the can well before using and to spray a few inches away from the surface for best results. Please wait until the paint is dried before using the appliance. This is a genuine OEM part.

Easy Part #:
EAP347819
Availability:
In Stock
Price:
$18.90

Hose clamp (clamp, hose)

This single hose clamp is used to hold the water hose in place on the pump, to avoid the hose or pump from leaking water. If you notice your washer leaking you may need to replace the clamp. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.

Easy Part #:
EAP11740613
Availability:
In Stock
Price:
$10.33

Lid strike (strike)

This part is used to activate the lid switch when the lid opens/closes.

Easy Part #:
EAP11741871
Availability:
In Stock
Price:
$10.30

Suspension pads - package of 3 (pads)

This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.

Easy Part #:
EAP334456
Availability:
In Stock
Price:
$11.16