Parts for Kenmore Models 11062832100

Heating element connection wire kit (terminal wire kit (for heater element wiring harness repair))

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

Easy Part #:: EAP334206

Availability:: In Stock

Price:: $10.30

Rear drum felt seal (seal, rear drum)

This seals Includes adhesive. This part helps seal the drum to prevent hot air from escaping.

Easy Part #:: EAP8691753

Availability:: In Stock

Price:: $48.88

Dryer blower wheel (wheel, blower)

The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.

Easy Part #:: EAP11743785

Availability:: In Stock

Price:: $30.92

Push-to-start switch (switch, push-to-start)

This is a genuine OEM part. The push-to-start switch is composed of metal and plastic components. Compatible with dryers, the Whirlpool switch powers the appliance after the button is pressed. With a screwdriver, this item is fitted between the bracket and console. The push-to-start switch is sold individually.

Easy Part #:: EAP11742178

Availability:: In Stock

Price:: $30.57

Screw, 8/18 x 3/8 (screw, 8-18 x 3/8)

This screw is sold individually.

Easy Part #:: EAP11746840

Availability:: In Stock

Price:: $7.40

Lint trap housing seal (seal, bulkhead to lint chute)

This seal comes with the adhesive backing.

Easy Part #:: EAP11741506

Availability:: In Stock

Price:: $9.09

Two-piece split ring bearing (ring, bearing)

This is a replacement bearing ring kit for your dryer. The bearing rings are found on the top and bottom lips of the dryer drum. If your dryer is unusually noisy, or the drum will not turn during operation, or if there are marks left on your clothes after a cycle, you may need to replace the bearing ring kit. The kit comes with 2 bearings, one for the top and one for the bottom of the dryer drum. Remove the front panel of your dryer to access the dryer drum for this repair. At this point you can use a pair of needle nose pliers to release the old bearing rings from the drum. Snap the new bearing rings on, and reassemble the dryer to complete your repair.

Easy Part #:: EAP334199

Availability:: In Stock

Price:: $48.83

Drum roller shaft - left side (shaft, l.H.)

Replace the shaft of your left side drum support roller with this part from Whirlpool/Kenmore. This replacement shaft is 2-7/8 inches long. It is meant for use with many of Whirlpool/Kenmore's gas and electric clothes dryers that have been manufactured since 1965. Also known as Drum Roller Shaft.

Easy Part #:: EAP11753706

Availability:: In Stock

Price:: $56.71

Screw (screw, 8-15 x 1/2)

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:: EAP11742721

Availability:: In Stock

Price:: $7.37

Seal (seal, lint chute)

This seal comes with the adhesive backing.

Easy Part #:: EAP12745423

Availability:: In Stock

Price:: $16.68

Seal and bearing (seal and bearing assembly)

This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit.

Easy Part #:: EAP11773177

Availability:: In Stock

Price:: $43.64

Single front panel cip (clip (2))

This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.

Easy Part #:: EAP11731288

Availability:: In Stock

Price:: $15.32

Cover screw (screw, 10-16 x 1/2)

Sold individually.

Easy Part #:: EAP11740701

Availability:: In Stock

Price:: $7.40

Drum support roller shaft - right side (shaft, r.H.)

Replace the shaft of your right side drum support roller with this part. This replacement shaft is 3-3/16 inches long, but does not require a washer or a nut.