Parts for Kenmore Models 11096502800

Cycling thermostat - limit 135/155 (thermostat, 150f / 66f)

Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 degrees Fahrenheit. The differential of this thermostat is 20 degrees, meaning that with this thermostat, the heating element will cycle back on once the internal temperature drops by 20 degrees.

Easy Part #:: EAP11743793

Availability:: In Stock

Price:: $49.43

Screw

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an appliance to ensure an electrical connection is not lost.

Easy Part #:: EAP11738704

Availability:: On Order

Price:: $7.40

Drum support shaft - rear shaft with right hand threads (shaft, l.H. Thread)

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

Easy Part #:: EAP11753708

Availability:: In Stock

Price:: $45.18

Screw (screw, no. 8 x 1/2)

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:: EAP11742721

Availability:: In Stock

Price:: $7.37

Blower wheel (wheel, blower)

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over time. But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you probably need to replace it.

Easy Part #:: EAP11743811

Availability:: In Stock

Price:: $39.66

Cover screw (screw, 10-16)

Sold individually.

Easy Part #:: EAP11740701

Availability:: In Stock

Price:: $7.40

Single access panel spring retainer/clip (retainer)

Sold Individually.

Easy Part #:: EAP11741425

Availability:: In Stock

Price:: $9.09

Motor pulley - 60 hz. (pulley, 60 hz)

Sold individually.

Easy Part #:: EAP11744884

Availability:: In Stock

Price:: $46.21

Drum support roller shaft - right hand threads (shaft, r.H. Thread)

This shaft is for the front with right hand thread. Sold individually.

Easy Part #:: EAP11753707

Availability:: In Stock

Price:: $46.35

High limit thermostat - l295-50f (thermostat 295f (146c))

This hi-limit thermostat acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this piece will shut down power to the heating element.

Easy Part #:: EAP11741456

Availability:: In Stock

Price:: $73.26

Single access panel clip (clip (2))

Sold individually.

Easy Part #:: EAP11740620

Availability:: In Stock

Price:: $7.89

Leveling leg locking nut (nut, 3/8 x 16 (r.H.))

This nut is sold individually. Size: 3/8-16

Easy Part #:: EAP11741219

Availability:: In Stock

Price:: $7.23

Washer (washer, support)

This support washer is located on the drum roller support shaft and it helps prevent the drum roller and pulley from rubbing against the bracket they are attached to. If your dryer is making noises, it may be the support washer becoming loose on the support shaft. The manufacturer suggests replacing the support washers at the same time as the rollers. This is a genuine OEM part. Please make sure you disconnect the power to the dryer before starting your repair.