25354363403 Kenmore Refrigerator Parts List

Basket hanger - left side (hanger base)

This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front trim, glass shelf, and basket. Use a 1/4 inch nut driver to unscrew to the basket hanger. Remove the hanger and put the new one on the mounting pegs, installing the rest of the parts in reverse order.

Hinge mounting hexagonal screw (hinge screw)

Sold individually.

Light socket (socket-lig)

Ice chute door (door assy-ic)

An ice chute is mounted to the interior panel and extends between the interior panel opening and the dispenser opening for transferring ice through the chute door.

Drive gear (gear)

This icemaker drive gear works in conjunction with the ejector blades. The gear helps rotate the ejector arm to push the ice from the ice maker in to the ice bin. If your ice maker is not dispensing ice you may need to replace this part. The gear is little over an inch in diameter, white, and made of plastic. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.

Adaptive defrost control board (defrost temperature control)

This part allows the refrigerator to go into defrost mode only when required and comes with the wiring harness. ***Please Note: This control will appear different than the original but will function the same.

Lower crisper cover - frame only (cover)

Glass is NOT included.

Dairy door (door)

This dairy door, also known as a dairy bin cover, is a genuine OEM replacement part for your refrigerator. The dairy cover is a plastic part that serves as a covering to a shelf on your fridge door, traditionally where dairy products such as butter are housed. The door can become cracked and need replacing. This door is held in place by plastic tabs. To remove it, push one side in to release the tab, and pull the door out. Simply snap the new dairy door into place.

Water filter base

The water filter base is made of plastic, is white/blue in color, and is used to connect the water lines into the water filter and hold the water filter in place. The water filter lines have a blue release collar at the top. If the O-rings have gone bad, the filter is leaking, or the locking device has failed and the water filter is not locking in, you may need to replace the water filter base. This is a genuine OEM part sourced directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Basket hanger - right side (hanger base)

Pan cover insert (insert)

Also used as shelf.

Meat pan - clear (meat pan)

This deli drawer is for refrigerators. Deli drawer holds meats, vegetables and snacks in the fresh food compartment of the refrigerator.

Pan head screw (screw)

Sold Individually. Order quantity required.

Temperature control thermostat (temperature control)

This thermostat regulates the temperature of the freezer section.

Hinge bearing

This part is the replacement hinge bearing for your refrigerator. It is made of black plastic and is approximately 1 inch in diameter, and 1 ¼ inch in length. The hinge bearing connects the door panel and the door hinge and helps the door open and close properly. If you notice a clicking sound when opening or closing your refrigerator, or if the door won’t close at all, you may need to replace the hinge bearing. This part is sold individually and is an OEM part sourced directly from the manufacturer.