25356979602 Kenmore Refrigerator Parts List

Screw,control mtg. (screw-#8-18)

Screw

This screw is sold individually.

Refrigerator condenser fan motor kit (motor)

This is a replacement condenser fan motor kit for your refrigerator. This six-piece kit contains foam tape, 2 screws, the fan blade, the new motor mounting bracket, and the condenser fan motor. The condenser fan motor is found in the back of the refrigerator, and it moves air across the compressor and the condenser to keep them cool. If the motor has failed, the condenser and the compressor will run hot, and this can cause the refrigerator not to cool. This is an OEM part from the manufacturer.

Icemaker assembly (icemaker)

This icemaker is used on newer models where the cord will plug directly in to the back of the freezer. It includes the cover, fill cup, bail arm and a four-pin plug harness.

Drive blade

This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.

Pan cover insert (pan insert)

Glass Only. Frame not included.

Fan blade

This part blows air over the condenser.

Hexagonal screw (hinge screw)

Sold individually.

Hinge kit - left and right hinges (adjustable h)

This is the replacement hinge kit for your refrigerator. This kit contains both the left and right hinges. Each hinge is made mainly of metal and plastic and is approximately 3 inches by 3 inches. This hinge kit does not contain the mounting hardware. The adjustable hinge kit supports the refrigerator and freezer doors and allows the doors to pivot open. The hinge kit also makes it easy to level the doors. This kit is a genuine OEM part sourced directly from the manufacturer.

Dairy door

Basket hanger - left side (hanger base)

This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front trim, glass shelf, and basket. Use a 1/4 inch nut driver to unscrew to the basket hanger. Remove the hanger and put the new one on the mounting pegs, installing the rest of the parts in reverse order.

Screw (screw set)

10 - 32 x 0.375

Fixed freezer shelf (shelf)

Light socket (socket-lig)

Ice chute door (door assy-ic)

An ice chute is mounted to the interior panel and extends between the interior panel opening and the dispenser opening for transferring ice through the chute door.