25358082892 Kenmore Refrigerator Parts List

Evaporator fan blade (fan blade, red)

If your refrigerator or freezer is too warm or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

Ice dispenser drum (drum-ice disp)

This part helps push the ice through the front plate to be crushed.

Screw (screw, cr pan hd, 10-16 x 1/2, spec/hi-lo)

Cross Recessed Pan Head Screw Size: 10-16 X 0.500

Drive blade

This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.

Dual inlet water valve - 120v 60hz (valve-water filter, dual solenoid, 115v, w/nut)

The water inlet valve is a solenoid-operated switch and when it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold or the water dispenser.

Lower crisper drawer - front not included (pan-storage, lower)

Front must be ordered separately.

Hexagonal screw (screw-hinge mtg, hex hd, 1/4-20 x 0.875)

Sold individually.

Refrigerator door shelf bin (bin-door, gallon)

Drive gear (gear)

This icemaker drive gear works in conjunction with the ejector blades. The gear helps rotate the ejector arm to push the ice from the ice maker in to the ice bin. If your ice maker is not dispensing ice you may need to replace this part. The gear is little over an inch in diameter, white, and made of plastic. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.

Bulb (light bulb/lamp, 4 w, 115v)

Sold individually.

Dispenser grille (drip tray, white)

This white dispenser grille is located at the bottom of the water/ice dispenser.

Water reservoir tank replacement kit (water tank)

This water reservoir tank kit contains an approximately forty-two foot long water line tube, two connectors, and two screws. This is a replacement kit from the original tank which is no longer available.

Micro switch (switch-micro)

Refrigerator ice dispenser solenoid (solenoid assembly)

The cube solenoid allows cube or crushed ice to be dispensed on demand. 120V 60Hz

Dispenser drip tray (drip tray, black)

This black ice and water dispenser drip tray is seven and a half inches long.