36350227000 Kenmore Refrigerator Parts List

Ice dispensing drive cup (drive cup)

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.

Ice dispenser solenoid service kit (solenoid arm)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Defrost thermostat

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator. It will cut out at 60 degrees Fahrenheit and kick back in when the temperature drops to 32 degrees Fahrenheit.

Door hinge shim (riser shim)

This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Ice bucket and auger assembly (bracket auger)

Ice bucket auger (helix auger)

When activated, the auger rotates and pushes ice out of the bin through the chute to the user.

Dispenser door solenoid kit (solenoid)

This kit is used on the water/ice dispenser door. This part allows water/ice to be dispensed on demand.

Ice bucket support - left side (lf ice buckt)

This is the ice bucket support for your refrigerator. The ice bucket support is connected to the freezer wall and supports the ice bucket. If the support is broken, the bucket may hang to one side, or it may fall out of position entirely. In either case, you will need to replace the ice bucket support. There will be a support on either side of the ice bucket, but this part is for the left side only. It is sold individually so be sure to select the part for the correct side of the bucket. This is an OEM part sourced directly from the manufacturer.

Armature kit (shroud)

Screw (scr 8-18 ab)

This screw is sold individually. Size 8 -18 ab fltr 5/8.

Screw (scr 8-18 ba)

Size: 10-32 GXTT FLP .595 Sold individually.

Defrost heater with thermostat (heater harne)

This part assembly has 2 functions: The defrost heater keeps the cooling coils from frosting over and the thermostat senses that the heat near the cooling coils has reached the desired temperature.

Evaporator fan blade kit (fan blade)

Freezer shelf support (shelf support)

Sold Individually.

Plastic tubing - 5/16 inch (tube)

This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.