36350627000 Kenmore Refrigerator Parts List

Freezer wire shelf (freezer shelf)

This part is approx. 14 3 /4" L x 13 1/4" W. Sold individually.

Light socket (socket&te)

This part is a replacement light socket for your refrigerator. It connects to the power source, and holds the light bulb. If the light in your refrigerator is not working, you could have a faulty socket. It is important to determine if the light bulb is simply burned out, or if the socket is causing the issue. Be sure to disconnect your refrigerator from the power source before you begin this repair. This socket is black in color and is sold individually. This is an OEM part sourced directly from the manufacturer.

Primary water inlet valve (water valve)

This part has one port and 2 solenoids and comes with a mounting bracket. The water valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold.

Actuator pad (pad actua)

Note: This part is now ONLY available in black.

Ice dispensing drive cup (drive cup)

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.

Dairy door (dairy cover)

Ice dispenser solenoid service kit (solenoid arm)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Freezer light shield (light shield)

Defrost thermostat

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator. It will cut out at 60 degrees Fahrenheit and kick back in when the temperature drops to 32 degrees Fahrenheit.

Door hinge shim (riser shim)

This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Ice bucket auger (helix auger)

When activated, the auger rotates and pushes ice out of the bin through the chute to the user.

Dispenser door solenoid kit (solenoid)

This kit is used on the water/ice dispenser door. This part allows water/ice to be dispensed on demand.

Ice bucket support - left side (lf ice buckt)

This is the ice bucket support for your refrigerator. The ice bucket support is connected to the freezer wall and supports the ice bucket. If the support is broken, the bucket may hang to one side, or it may fall out of position entirely. In either case, you will need to replace the ice bucket support. There will be a support on either side of the ice bucket, but this part is for the left side only. It is sold individually so be sure to select the part for the correct side of the bucket. This is an OEM part sourced directly from the manufacturer.

Armature kit (shroud)

Screw (scr 8-18 ab)

This screw is sold individually. Size 8 -18 ab fltr 5/8.