36358062894 Kenmore Refrigerator Parts List

Defrost thermostat

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator. It will cut out at 60 degrees Fahrenheit and kick back in when the temperature drops to 32 degrees Fahrenheit.

Door hinge shim (riser shim)

This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Ice bucket and auger assembly (bracket auger)

Ice bucket auger (helix auger)

When activated, the auger rotates and pushes ice out of the bin through the chute to the user.

Drawer slide rail - left side (slide pan)

This part is the replacement drawer slide rail for your refrigerator. It is made of white plastic and is approximately 16 inches long and 1.5 inches wide. The crisper draw will slide in and out along this rail. If the rail is damaged or missing, the crisper will either hang from one side, or it will not stay in place at all. The drawer slide rail is for the left side of the drawer only, so be sure to check that you are replacing the correct drawer rail. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Dispenser door solenoid kit (solenoid)

This kit is used on the water/ice dispenser door. This part allows water/ice to be dispensed on demand.

Armature kit (shroud)

Dispenser grille (grill rec wh)

This white dispenser grill is located at the bottom of the ice/water dispenser.

Screw (scr 8-18 ab)

This screw is sold individually. Size 8 -18 ab fltr 5/8.

Drawer slide rail - right side (slide pan)

This drawer track supports the right hand side of the sliding drawer.

Freezer shelf support (shelf support)

Sold Individually.

Evaporator fan blade kit (fan blade)

Defrost heater with thermostat (heater harne)

This part assembly has 2 functions: The defrost heater keeps the cooling coils from frosting over and the thermostat senses that the heat near the cooling coils has reached the desired temperature.

Plastic tubing - 5/16 inch (tube)

This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.

Ice bucket (ice dispenser)