36359572990 Kenmore Refrigerator Parts List

Actuator pad (pad actuator wh)

Note: This part is now ONLY available in black.

Ice dispensing drive cup (cup drive)

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.

Dairy door (door dairy)

Ice dispenser solenoid service kit (solenoid arm asm)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Freezer light shield (shield light fz)

Defrost thermostat (thermostat def)

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator. It will cut out at 60 degrees Fahrenheit and kick back in when the temperature drops to 32 degrees Fahrenheit.

Door hinge shim (shim riser cam .093)

This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Dispenser water reservoir (water tank disp asm)

This in-refrigerator dispenser water reservoir tank comes with tubing. This tank stores water until the water actuator is activated and water is requested.

Screw (screw 8-18 ab hxw 3/8)

This screw is sold individually.

Ice bucket auger (auger helix disp)

When activated, the auger rotates and pushes ice out of the bin through the chute to the user.

Dispenser door solenoid kit (solenoid asm)

This kit is used on the water/ice dispenser door. This part allows water/ice to be dispensed on demand.

Condenser fan motor - 115v (motor cond fan)

This part comes with 3 round pin connection terminals. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Defrost heater with thermostat (heater harness def asm)

This part assembly has 2 functions: The defrost heater keeps the cooling coils from frosting over and the thermostat senses that the heat near the cooling coils has reached the desired temperature.

Armature kit (shroud solenoid)

Dispenser grille (grille recess wh)

This white dispenser grill is located at the bottom of the ice/water dispenser.