3639517880 Kenmore Refrigerator Parts List

Ice bucket auger kit (auger helix disp)

This ice bucket auger kit come with an auger and a blade. Please note: As per manufacture the part shown in the picture is no longer available. The updated helix coil is now approximately 5". If you currently have the original part you will need to order the complete auger/bucket assembly.

Condenser fan motor - 115v (motor cond fan)

This part comes with 3 round pin connection terminals. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Defrost thermostat kit (defrost thermostat)

This refrigerator defrost thermostat will cut out at 55 degrees F and kick back in when the temperature drops to 35 degrees F. It comes with connectors and the mounting brackets.

Armature kit (shroud solenoid)

Ice dispenser plate (plate front disp)

Evaporator fan blade kit (ring fan blade)

Ice dispenser bucket (bucket ice disp)

Fill tube grommet (grommet water fill)

This fill tube grommet is used on the icemaker.

Scr 8-18 tpt 1/4 (screw motor mount)

Evaporator fan motor kit (motor evap fan)

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer come with the part.

Screw

Comes 12 in a pack.

Ice storage door (door only-ice storage)

This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.

Upper crisper drawer (pan upper)

1/4 tubing nut (nut & sleeve)

Cam riser (hinge cam riser)

Lower door hinge cam riser for refrigerator/freezer - this is one of the parts needed if the door won't stay closed.