3639524750 Kenmore Refrigerator Parts List

Door hinge shim (shim riser cam)

This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Ice bucket auger kit (auger helix disp)

This ice bucket auger kit come with an auger and a blade. Please note: As per manufacture the part shown in the picture is no longer available. The updated helix coil is now approximately 5". If you currently have the original part you will need to order the complete auger/bucket assembly.

Condenser fan motor - 115v (motor cond fan)

This part comes with 3 round pin connection terminals. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Defrost thermostat kit (defrost thermostat)

This refrigerator defrost thermostat will cut out at 55 degrees F and kick back in when the temperature drops to 35 degrees F. It comes with connectors and the mounting brackets.

Armature kit (shroud solenoid)

Ice dispenser plate (plate front disp)

Evaporator fan blade kit (ring fan blade)

Plastic tubing - 5/16 inch (tube plastic)

This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.

Ice dispenser bucket (bucket ice disp)

Fill tube grommet (grommet water fill)

This fill tube grommet is used on the icemaker.

Scr 8-18 tpt 1/4 (screw motor mount)

Evaporator fan motor kit (motor evap fan)

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer come with the part.

Screw

Comes 12 in a pack.

Ice storage door (door only-ice storage)

This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.

Door shim cam (shim cam & door stop)

Sold individually.