3639542613 Kenmore Refrigerator Parts List

Ice dispensing drive cup (cup, drive, dispenser)

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.

Ice dispenser solenoid service kit (solenoid)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Defrost thermostat

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator. It will cut out at 60 degrees Fahrenheit and kick back in when the temperature drops to 32 degrees Fahrenheit.

Door hinge shim (shim riser dam)

This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.

Ice bucket and auger assembly (bucket and auger assembly)

Ice bucket auger kit (auger, helix, disp)

This ice bucket auger kit come with an auger and a blade. Please note: As per manufacture the part shown in the picture is no longer available. The updated helix coil is now approximately 5". If you currently have the original part you will need to order the complete auger/bucket assembly.

Dispenser door solenoid kit (solenoid and bracket assembly)

This kit is used on the water/ice dispenser door. This part allows water/ice to be dispensed on demand.

Condenser fan motor - 115v (motor, condenser fan)

This part comes with 3 round pin connection terminals. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Armature kit (shroud, solenoid)

Freezer shelf support (support, shelf)

Sold Individually.

Ice bucket (bucket, ice disp)

Fill tube grommet (grommet, water fill)

This fill tube grommet is used on the icemaker.

Scr 8-18 tpt 1/4 (screw, motor mount)

Screw

Comes 12 in a pack.

Freezer wire shelf (shelf, freezer)