59652672201 Kenmore Refrigerator Parts List

Refrigerator water filter bypass (head, bypass)

This cap is used when bypassing the filter.

Ice maker auger and crusher blade assembly (crushed ice agitator assy)

This is the replacement ice maker auger and crusher blade assembly for your refrigerator. It is approximately 15 inches long and 7 inches wide. The ice maker auger sits within the ice maker assembly and rotates to push the ice from ice container into the dispenser chute. If your ice maker bucket is full, but ice is not being dispensed, it is an indication that the auger is damaged. Be sure to disconnect power from the refrigerator before you repair the auger. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

Switch (switch, ref light)

This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light is not working properly. In order to make this repair you will need a Phillips screwdriver, a pair of needle nose pliers, and a small flat blade screwdriver. This light switch is almost 2 inches long, 1.5 inches wide, and just over an inch thick.

Secondary water valve (valve-secondary water)

This part releases water from the supply line when it's activated.

Shelf support - left side (support, shelf (lt))

Single roller (roller)

This wheel is sold individually. It is located on the bottom of the refrigerator.

Freezer evaporator fan motor - 115v 60hz (motor, evaporator fan)

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will covert the heat into cool air, which is then circulated.

Crisper drawer - clear (pan, deli)

Sold individually.

Ice chute door (door, ice chute)

This part is the replacement ice chute door for your refrigerator/freezer. It is a round, black part that is approximately 2 ½ inches in diameter. The dispenser ice chute door opens to let ice through when dispensing into a glass or some other container. If the chute door is broken, your refrigerator may not be able to dispense ice properly. Be sure to disconnect the power from your refrigerator before you begin this repair. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

Toe grille clip (clip, toe grille (non-illus))

Sold individually.

Freezer shelf support (support, frz shelf)

This part is the replacement shelf support for your refrigerator/freezer. It is made of white plastic and is approximately 1 inch by 1 inch. The shelf support attaches to the side of your refrigerator wall and supports the shelf. If your shelf is sagging or will not stay in place, you may need to replace the support. To replace the support, use a wrench to turn the support clockwise until you can use a flat blade screwdriver to pop it out. Push the new support into the hole left by the old one until it is flush with the liner, then use the wrench to turn it clockwise until it locks in. This part is sold individually and is and OEM part.

Gallon fresh food door bin (bucket, ref door (gallon))

Sold individually.

Screw (screw, mach)

Sold individually.

Crushed ice wheel (wheel, crsh ice)

This crushed ice wheel is five inches in diameter. It is beige in color and is made of plastic.

Single hex head screw (screw, sm (non-illus))

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".