59665934403 Kenmore Refrigerator Parts List

Plastic tubing (tubing)

The water supply tubing is made of plastic and goes between the water inlet valve and the ice maker inlet tube. The tubing is 8 1/2 feet long and 1/4” in diameter. The water supply tubing transports water to the ice and water dispensers. If there is no water going to the ice maker, the refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace the water supply tubing. This is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Bimetal defrost thermostat (bimetl-def)

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

Single wheel assembly (cabinet roller)

This wheel is sold individually - purchase quantity needed.

Ice maker wire harness (wire harness)

This part connects to the electrical and allows power to flow through your appliance.

Ice maker front cover (cover)

Grille, shroud (grille)

Bottom hinge pin (pin)

Sold individually.

Dairy tray

Door gasket (gasket panel)

Crisper drawer cover frame (crisper frame)

Glass NOT included. This is the frame only. This crisper drawer cover frame is for refrigerators. Crisper drawer cover frame supports the crisper drawer and holds the shelf that covers the crisper drawer. Order the shelf insert separately if needed. Wear work gloves to protect your hands when installing this part.

Door stop

This part is located in the bottom hinge section.

Door hinge

Hinge only.

Refrigerator door hinge nylon washer (shim)

Motor-cond fan,115vac 1090rpm (motor-cond)

This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan blade. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan. This model is all white in color, and is roughly 4 inches long, 3 inches wide, and 3.5 inches thick.

Levelling foot (brake foot)