59675232403 Kenmore Refrigerator Parts List

Plastic tubing (tubing)

The water supply tubing is made of plastic and goes between the water inlet valve and the ice maker inlet tube. The tubing is 8 1/2 feet long and 1/4” in diameter. The water supply tubing transports water to the ice and water dispensers. If there is no water going to the ice maker, the refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace the water supply tubing. This is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Bimetal defrost thermostat (bimetl-def)

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

Defrost/evaporator heater (heater evaporator)

The defrost heater is similar to the burners on an electric stove. It's located just beneath the cooling coils, which are concealed behind a panel in the freezer compartment. The heater gets hot. And, because it's close to the cooling coils, any ice or frost build-up melts.

Grille, shroud (grille)

Ice maker wire harness (wire harness)

This part connects to the electrical and allows power to flow through your appliance.

Single wheel assembly (cabinet roller)

This wheel is sold individually - purchase quantity needed.

Ice maker front cover (cover)

Bottom hinge pin (pin)

Sold individually.

Dairy tray

Deli pan (pan deli)

This deli drawer is for refrigerators and holds meats, vegetables and snacks in the fresh food compartment of the refrigerator.

Door hinge

Hinge only.

Refrigerator door hinge nylon washer (shim)

Door stop

This part is located in the bottom hinge section.

Door shelf trim (retainer, do)

Button plug

Sold individually. White in color.