66513103K901 Kenmore Dishwasher Parts List

Search the entire 66513103K901 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

High limit thermostat (thermostat)

This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.

Easy Part #:
EAP11743423
Availability:
In Stock
Price:
$30.76

Sump and motor assembly (pump motor)

This part moves water up from the sump collection area and up through the spray arms.

Easy Part #:
EAP11757411
Availability:
In Stock
Price:
$310.96

Door switch (switch)

This dishwasher door switch will shut your dishwasher off when the door is opened.

Easy Part #:
EAP11745501
Availability:
In Stock
Price:
$23.14

Impeller (seal)

This is the replacement impeller kit for your dishwasher. This impeller kit comes with 4 pieces, including the impeller and seals which you will need for the repair. The impeller and seal kit is mounted on the dishwasher motor. If your dishwasher is not cleaning dishes properly, it may be an indication that your impeller has gone bad, and you are not getting proper water pressure. If the seals have gone bad, your dishwasher may start to leak. If you are having either of these problems, you may need to replace the impeller kit. Be sure to disconnect the water and power source from the dishwasher before you begin this repair. This is an OEM part sourced directly from the manufacturer.

Easy Part #:
EAP12069388
Availability:
In Stock
Price:
$80.33

Sump pump check valve (check valve)

May differ in appearance, but functions same as original. This valve allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.

Easy Part #:
EAP11745441
Availability:
In Stock
Price:
$44.79

Inlet fill hose (fill hose)

This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, you will need a 1/4 inch nut driver, Channellock pliers, and a Phillips screwdriver. Replacing this part will require some disassembly, such as removing the water inlet valve from the fill hose, and the clamps which secure the hose in place. Reuse your existing clamps when securing your new fill hose in place.

Easy Part #:
EAP11738178
Availability:
In Stock
Price:
$71.22

Screw - 8-18 x 5/8 (screw #8-18)

Sold individually.

Easy Part #:
EAP11747050
Availability:
In Stock
Price:
$7.40

Door latch and switch assembly (door latch)

Handle NOT included. This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

Easy Part #:
EAP11754317
Availability:
In Stock
Price:
$62.11

Feed tube with 3rd level spinner (tube)

Also known as the water supply tube.

Easy Part #:
EAP11748131
Availability:
In Stock
Price:
$66.59

Exterior door panel - stainless steel (panel)

Stainless Steel in color.

Easy Part #:
EAP3418317
Availability:
In Stock
Price:
$205.20

Water supply manifold probe (probe)

Supplies water from the main water feed tube to the middle manifold water tube.

Easy Part #:
EAP11748182
Availability:
In Stock
Price:
$30.96

Kickplate - black (toe panel)

New Black Single Metal Access Panel Replacement Kit. Replaces old two part toe kick plates. Reuse insulation off old panel or see Recommended Parts.

Easy Part #:
EAP11769017
Availability:
In Stock
Price:
$76.19

Turbidity sensor (sensor)

Measures level of soil in the water.

Easy Part #:
EAP11757214
Availability:
In Stock
Price:
$29.20

Lower spray arm hub - gray (suport-arm)

The lower spray arm hub sits inside the dishwasher at the base, and feeds water into the lower spray arm. The arm hub is made of plastic and measures 3 inches long by 1.5 inches wide. If the spray arm becomes loose, or does not spin freely, check for damage to the spray arm hub. This is a genuine OEM replacement part sourced directly from the manufacturer.

Easy Part #:
EAP11748138
Availability:
In Stock
Price:
$78.13

Axle adjuster (axle rack)

This part is a replacement axle adjuster for your dishwasher. It is made of white plastic and is approximately ¾ of an inch long and ½ an inch wide. The axle adjuster attaches to the dishrack roller bracket and allows the roller to turn. If the axle is damaged or missing, the rollers will not turn, and it will be difficult to roll your dishrack in and out effectively. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:
EAP11745455
Availability:
In Stock
Price:
$12.15