79095651001 Kenmore Range Parts List

Anti-tip kit (anti tip kit)

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tipping when force or weight is applied to an open oven door. The bracket is secured to the floor and wall and fits over the rear leveling leg in the back of the appliance, in a cutout specifically designed for the anti-tip bracket. This part is very essential to the safe operation of the appliance. Failure to install the bracket properly can result in the oven tipping or falling and causing injuries.

Oven probe (sensor)

Also known as a temperature sensor. This part is used to detect the temperature within the oven cavity. **The following instructions only apply if the connector piece is different than the original.** Prior to cutting the leads, please check the length of the wire you will need. 1. Cut the leads on your original sensor and the replacement sensor. Be sure to leave enough length to strip and splice the new probe and original connector together. 2. Strip the insulation, or wire cover, back approximately 1/4 inches on the new probe and original connector. 3. Twist the ends of your new probe and original connector together 4. Use a wire nut, or another high heat fastener to cover your exposed wires. 5. Install your new oven probe and re assembly your oven.

Screw (screw-8-18x1)

Sold Individually.

Light indicator - 125v (indicator lamp)

Broiler pan grate insert (insert broil)

The broiler pan and insert allows you to cook on a stable surface while allowing the liquid to drain into the pan below, making clean-up easier. This is a genuine OEM part.

Oven light socket (light socket)

The light socket is located inside the oven cavity to provide power to the light while holding the light bulb in place. If the light bulb is not working, the switch might have failed and will need to be replaced. This is a genuine OEM part. Please remember to disconnect power to the oven before starting your repair.

Element (burner)

Switch rocker (switch)

Element (dual elem 8)

This is a 1000/2100W element and includes the limiter.

Overlay - white (overlay clock)

This part goes in front of the clock/timer to allow visual indication of where the buttons are on the oven. Example bake, broil & clean. Only available in white. Black version is no longer available.

Oven door handle mounting screw (oven screw)

*Sold Individually. Washerhead Screw 10 - 24 x 1.81

Switch (switch-infinite)

You can select what size surface to use according to the size of your pots and pans.

Dual element rocker switch (rocker switc)

This part allows you to turn the dual element on.

Surface indicator light - 250v (light lamp)

Door hinge with spring (oven door hinge)

Sold Individually.