Maytag Dryer

Maytag Dryer Hardware

Find Your Appliance Parts

Search by part or model number

Need help finding your Model Number?

Popular Maytag Dryer Hardware

Roller Support Tri-Ring – Part Number: WPW10512946

Roller Support Tri-Ring

Part Number: WPW10512946
The tri ring is used to hold the drum support rollers or the idler pulley onto the shaft. If your dryer will not tumble or is noisy, you may need to replace the tri ring. This is a genuine OEM part and is sold individually.
Easy Part #:
EAP11755850
Availability:
In Stock
Your price
$6.35
Igniter Kit – Part Number: 279311

Igniter Kit

7 Reviews

Part Number: 279311
This silicon carbide igniter with ceramic holder kit includes the 3-inch flat igniter, mounting bracket, 4-inch wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers. This part ignites the gas within the dryer to heat the dryer during the cycle, so if your dryer takes too long to dry, has no heat or not enough heat, you may need to replace the igniter. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is very fragile and should be handled with care.
Easy Part #:
EAP334180
Availability:
In Stock
Your price
$38.36
Retaining Ring – Part Number: WP9703438

Retaining Ring

Part Number: WP9703438
The retaining clip goes onto the end of the roller axle and holds the drum roller on to the axle. If the ring is broken or damaged, you will need to replace it. This is a genuine OEM part and is sold individually.
Easy Part #:
EAP11746909
Availability:
In Stock
Your price
$6.63
Screw – Part Number: WPW10661886

Screw

Part Number: WPW10661886
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.
Easy Part #:
EAP11757021
Availability:
In Stock
Your price
$6.68
Idler Pulley Shaft Washer – Part Number: WPY312527

Idler Pulley Shaft Washer

Part Number: WPY312527
This idler pulley shaft washer is used with many clothes dryers and is located between the idler pulley and the bracket. If the idler shaft washer is worn it will cause the washer to rub against the e-clip and bracket which will cause a squeaky noise and will need to be replaced. This part is sold individually and there are two required for each roller. The idler shaft washer is less than an inch long, and it is black in color. Please remember to disconnect the power to your dryer before starting the repair.
Easy Part #:
EAP11757538
Availability:
In Stock
Your price
$6.29
Drum Roller Shaft Washer – Part Number: WP312535

Drum Roller Shaft Washer

Part Number: WP312535
This roller shaft washer is just under an inch in diameter and is used for some Whirlpool brand clothes dryers. It is located on the drum support roller shaft. If your dryer is noisy or will not tumble, you may need to replace the roller shaft washer. This is a genuine OEM part. Please remember to disconnect the power supply to your dryer before you start your repair. Sold individually.
Easy Part #:
EAP11740748
Availability:
In Stock
Your price
$13.05
Thrust Washer – Part Number: WP233520

Thrust Washer

Part Number: WP233520
This part is located between the drum support rollers and idler pulley in your dryer to help prevent the parts from bumping up against the brackets they are attached to. If your dryer has a burning smell, is noisy, or will not tumble, you may need to replace the thrust washer. The washer is 3/4 inches in diameter and a is genuine OEM part. It is recommended to disconnect the power to your dryer before you start your repair.
Easy Part #:
EAP11740482
Availability:
In Stock
Your price
$7.53
Screw, 8/18 x 3/8 – Part Number: WP90767

Screw, 8/18 x 3/8

Part Number: WP90767
This screw is sold individually.
Easy Part #:
EAP11746840
Availability:
In Stock
Your price
$4.54
Single Front Panel Cip – Part Number: W10854425

Single Front Panel Cip

1 Review

Part Number: W10854425
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.
Easy Part #:
EAP11731288
Availability:
In Stock
Your price
$8.38
Knob Spring-Clip – Part Number: WP688805

Knob Spring-Clip

Part Number: WP688805
Also known as the inside sleeve for the knob to be able to properly fit over the shaft of the switch. Sold individually.
Easy Part #:
EAP11743754
Availability:
In Stock
Your price
$6.43