Cooktop Switches

Range Surface Element Control Switch - 6 Inch - 1560 W

1 Review

Part Number: WB24T10029

This switch controls the small burner on a range/stove top.

Range Infinite Burner Switch - 8 Inch

2 Reviews

Part Number: WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Surface Burner Switch

2 Reviews

Part Number: W11088181

This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner switch turns the surface element on and off and allows you to control how much heat the element produces. The main reason to change the infinite switch is if the switch has shorted out inside, and is not allowing power to the burner, or if the contacts inside are stuck together and the element is stuck on high. Ensure that the burner is off, and the range has been disconnected from the power source before you begin this repair. This part is sold individually and is an OEM part.

Burner Switch Kit

1 Review

Part Number: 5303935086

This burner switch controls the stove top surface burner temperature. If your element will not heat and does not look defective, you may need to replace the switch. This kit includes screws, keeper for mounting, and several insert sizes to match your old knob. This switch kit is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Surface Element Switch

Part Number: W10900107

SWITCH FAN

1 Review

Part Number: WB24X10174

This part is the replacement fan switch or downdraft vent fan knob for your range hood. It measures approximately 2 inches by 1 inch. The fan switch allows you to turn on the range hood fan when it is actuated, which allows the fan to dissipate odors from the cooktop. If, when you hit the button to turn on the fan, nothing happens, then you may need to replace the fan switch. To remove the switch, pull it straight off from its post and replace with the new switch. For safety purposes, be sure to disconnect the range from the power source before you begin this repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Dual Surface Burner Switch Kit

1 Review

Part Number: 12002125

This switch is used to operate the dual surface burner.

Dual Burner Control Switch

Part Number: WB24T10063

This switch controls the dual burner.

Surface Unit Infinite Switch Kit

3 Reviews

Part Number: 700855K

This is a push-and-turn switch. This kit includes all necessary hardware to install the part. Switch comes with a D-shaped shaft.

Surface Burner Switch

Part Number: 318293827