Dishwasher Hoses and Tubes

Dishwasher Drain Hose

5 Reviews

Part Number: 807117001

The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage by carrying the drain water from the dishwasher drain pump to the kitchen sink drain. The drain hose measures 8 feet long. If your drain hose becomes damaged or cracked it will cause water to leak on the floor and you will need to replace the hose. This hose is white and black in color, made of plastic and is a genuine OEM part. Please make sure you shut off the water supply and disconnect the power to the dishwasher before starting your repair.

Water Supply Feed Tube

Part Number: 5304507087

Water is supplied to the upper arm through this tube via the pump assembly.

Drain Hose

5 Reviews

Part Number: WPW10545278

This part is used to drain water from your dishwasher.

Drain Hose

3 Reviews

Part Number: 8269144A

This drain hose is 6 and 1/2 feet.

Dishwasher Drain Hose

1 Review

Part Number: AEM69493808

HOSE ASSEMBLY, DRAIN

Part Number: AEM69493807

This replacement dishwasher drain hose connects the drain pump to the air gap or the garbage disposal to drain the water from the dishwasher. The hose is gray in color and made of plastic. If the drain hose becomes cracked or damaged it will cause a water leak and will need to be replaced. This is a replacement drain hose from the manufacturer. The manufacturer advises that if the drain hose that is being replaced does not have the vent tube going to the water inlet assembly, a new water inlet will need to be purchased. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.

CONDUIT MID Assembly

1 Review

Part Number: WD22X10094

Dishwasher Water Inlet Tubing

1 Review

Part Number: 5304523457

The tubing carries water from the water inlet valve to the tub.

Pump Filter Coupler

1 Review

Part Number: WD01X10342

This coupler, also known as a hose connector, is made of white plastic and is about one inch in height, and just over one inch in length. Replacing the coupler is a fairly easy repair. The hardest part of the repair is accessing the spray arm and filter to remove them, in order to replace the coupler. In order to complete this repair, you will need a flat head screwdriver and a 4-inch nut driver.

Faucet Adapter

2 Reviews

Part Number: WPW10254672

This faucet adapter is used with some portable dishwashers and washers to provide a means for draining and filling by connecting a water supply hose to a sink faucet. This part is used for faucets with inside or outside threads. For female connection (outside) just remove the washers. This is a genuine OEM part.