General Electric Dryer Thermostats

Thermal Fuse

5 Reviews

Part Number: 6931EL3003D

The high limit thermostat protects the dryer by shutting off the heating element when the dryer overheats. If the thermostat has blown, dryer won’t start or there is no heat, the thermostat will need to be replaced it can not be reset. If your dryer vent is clogged it could cause the thermostat to blow as well. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

THERMOSTAT

Part Number: WE04X25201

THERMOSTAT

Part Number: WE04X25194

Blower Thermostat

1 Review

Part Number: 6931EL3002M

The blower housing exhaust thermostat works in conjunction with your dryer by helping to regulate the temperature inside of the dryer drum. The thermostat will turn the heat off and on to help maintain the required temperature in the drum. If your dryer is not heating the thermostat may have shorted out and will need to be replaced. This is a genuine OEM part. Please remember to shut the power off to the dryer before starting the repair.

Inlet Control Thermostat

1 Review

Part Number: WE4M398

This part is located on the housing for the heating element.

Thermostat

Part Number: WE04X26214

Thermostat Assembly

Part Number: 6931EL3001E

The high limit thermostat on your dyer prevents your dryer from overheating. When the dryer heats up too much, the high limit thermostat will sense it and automatically shut off the heating element. If the thermostat is malfunctioning, it will need to be replaced, to avoid more serious issues. This product is an OEM part, direct from the manufacturer.

THERMOSTAT

Part Number: WE04X26216

THERMOSTAT

Part Number: WE04X25198

High Limit Thermostat - L315-65

Part Number: WE4M137

This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to the dryer motor if the temperature reaches an unsafe level. If you push the start button and nothing happens, the high-limit thermostat should be tested for continuity and replaced if the contacts are open. Be sure to disconnect power to the dryer before you begin this repair. This part is sold individually and is an OEM part.