1069651880 Kenmore Refrigerator Parts List

Search the entire 1069651880 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 ... 17
1-15 of 244

Replacement ice maker (complete icemaker assembly)

This 8-cube ice maker is used to help produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze the water until ice cubes are formed. Once the water has been frozen the ice cubes will be ejected from the mold into the ice bucket and will refill with water to repeat the process until the ice bucket is full. This ice maker does not include the bail or shut off arm. You can reuse the arms for your old ice maker or you can also order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. This ice maker will not fit refrigerators that have the ice auger mounted on the door. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:
EAP358591
Availability:
In Stock
Price:
$111.50

Icemaker control assembly (module assembly (incl. Itme 38))

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:
EAP2341896
Availability:
In Stock
Price:
$80.09

Condenser fan motor kit (fan motor)

This condenser fan motor is used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This part also helps to evaporate excess water in the drain pan. If your refrigerator/freezer section is too warm you may need to replace this part. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting the repair.

Easy Part #:
EAP395284
Availability:
In Stock
Price:
$58.77

Refrigerator single water inlet valve (valve solenoid)

The single water inlet valve is used to supply water to the water dispenser and the ice maker. The valve is 60Hz 120 Volts and 35 watts. If your ice maker isn’t producing ice or the water dispenser not dispensing water, the solenoid might have gone bad and will need to be replaced. This valve includes 1/4” tubing and a plastic union. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the refrigerator before starting the repair.

Easy Part #:
EAP11740365
Availability:
In Stock
Price:
$48.09

Door shelf end cap set (end cap, trim (2))

This door shelf end cap set contains two white end caps. Each end cap can be used as either the right or the left side. These end caps also come with adhesive strips and an instructions sheet.

Easy Part #:
EAP370794
Availability:
In Stock
Price:
$17.00

Ice maker water fill tube kit (fitting, water tube, icemaker)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10-inches long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:
EAP11739222
Availability:
In Stock
Price:
$9.44

Refrigerator door switch (rocker arm switch)

Door switch turns the light off when you close the door.

Easy Part #:
EAP12728638
Availability:
In Stock
Price:
$32.07

Bimetal defrost thermostat (bi-metal, defrost)

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

Easy Part #:
EAP11742474
Availability:
In Stock
Price:
$38.80

Screw (screw, 6-20 x 3/8)

Sold individually.

Easy Part #:
EAP11742744
Availability:
In Stock
Price:
$7.40

Water fill cup and bearing (cup, water fill)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:
EAP11743318
Availability:
In Stock
Price:
$33.67

Ice mold (mold and heater assembly (also order 542638 silicone grease))

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:
EAP11749915
Availability:
On Order
Price:
$129.08

Screw

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:
EAP11742721
Availability:
In Stock
Price:
$7.37

Water tube kit (tube water)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Easy Part #:
EAP11730901
Availability:
In Stock
Price:
$30.10

Cycling thermostat (thermostat (also order 542369 cement alumilastic))

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:
EAP11743313
Availability:
In Stock
Price:
$53.34

Ice pan (ice bucket (icemaker model))

This part may come in white or clear plastic, but either will still work and fit properly in your appliance.

Easy Part #:
EAP2362118
Availability:
In Stock
Price:
$27.20
< PREV 1 2 3 4 5 6 ... 17
1-15 of 244