On in-stock orders placed
before 4pm Eastern Time.


1-866-895-9295 Mon-Fri 7am to 1am ET Sat-Sun 7am to 11pm ET

Detailed View

345113-1-S-Whirlpool-3392519           -Thermal Fuse
345113-1-S-Whirlpool-3392519           -Thermal Fuse 345113-2-S-Whirlpool-3392519           -Thermal Fuse 345113-3-S-Whirlpool-3392519           -Thermal Fuse

Thermal Fuse

EAP Number: EAP345113
Manufacturer: Whirlpool
Part Number: 3392519

This Whirlpool thermal fuse attaches to the blower wheel housing of your clothes dryer. It is a onetime use part and cannot be re-set. It must be replaced when continuity between the pins is no longer present. This part is white in color, made from metal and is approximately 2 inches in length. It has an electrical terminal size is 3/16".

EAP #:


Compare At:


You save:


Your Price


Expert Repair Guide

  1. To replace the thermal fuse, first remove power from the dryer.
  2. Next remove the vent from the dryer, as the dryer will need to be moved away from the wall for this repair.
  3. Once you’ve pulled the dryer away from the wall, remove all the screws holding the back panel on.
  4. Then remove the panel and set it aside.
  5. The thermal fuse is located near the bottom on the blower housing.
  6. Once located, remove the two terminals attached to the fuse, being careful not to damage the wires and noting their placement.
  7. Then remove the screw securing the fuse, and get rid of the old one.
  8. Once the fuse has remove, install the new fuse and replace the screw and wires in the same order they were removed.
  9. Replace the back panel and reconnect the duct work.
  10. Restore power to the dryer.

We Guarantee...



Monday - Friday 7am to 1am ET
Saturday - Sunday 7am - 11pm ET
Contact Us