CTF19ECC Hotpoint Refrigerator Parts List

Light switch (refrigerator light switch. This switch activates the refrigerator light when the door is open. It also prevents the dispenser from working if the door)

The refrigerator light switch turns the interior light off and on when you open or close the refrigerator door. The light switch also prevents the front dispenser from working if the refrigerator door is opened. If the switch has shorted out or the light bulb is not turning on when the door is open, you may need to replace the switch. This switch is white in color and measures approximately 1 1/2” L x 1 1/4” W. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting the repair.

Defrost timer - 120v 60hz (defrost control)

The defrost timer acts like a clock, continually advances and alternates between activating the cooling cycle and the defrost heater. This 120V 60Hz defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange. If your refrigerator is too warm, freezer section is too warm, freezer is not defrosting, or leaking, you may need to replace the defrost timer. This is a genuine OEM part. Please remember to disconnect the power before starting the repair.

Package of 12 screws (screws, pkg of 12.)

This is a package of twelve Phillips-head screws. They can be used as replacement screws in refrigerators, ice makers, or freezers. Be sure to check that your appliance model is compatible with these screws. The screws are approximately ¾ of an inch in length.

Crisper pan cover (cover pan)

This cover is located over the crisper pan and also acts as a shelf.

Ice cube tray (tray ice)

14 Cube.

Evaporator fan blade kit (fan blade, plastic)

Defrost timer (defrost timer. Turn the dial on the timer clockwise to advance it into and out of defrost.)

This refrigerator defrost timer will cycle for thirty minutes after every ten hours of run time.

Fill tube grommet (icemaker fill tube grommet)

This fill tube grommet is used on the icemaker.

Condenser fan motor (motor cond fan)

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

Screw

Comes 12 in a pack.

Evaporator fan motor kit (motor evap fan)

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer come with the part.

Door shelf retainer bar end cap (cap shelf frt)

This is the replacement door shelf retainer bar end cap for your refrigerator. An end cap connects to the lower shelf bar on either side, and then snaps into position on the refrigerator door, allowing you to store items in the refrigerator door. To replace the end cap, simply disengage the whole bar assembly from the refrigerator door, then disengage the hook on the end cap from the rest of the bar assembly. Then, simply snap the end cap back into place, and connect it back to the refrigerator door. This part is sold individually.

Screw

Size: 10-16 ab. * Part may differ in appearance, but functions same as original. Sold Individually.

Retainer bar end cap (refrigerator door shelf retainer bar endcap)

Power cord (cord power)