J500XD1 GE Range Parts List

Bake element - 220v 2300w (oven bake heating element with screw-on terminals. The element is 18-1/4 inches wide, 14-1/2 inches deep to mounting flange. Terminal ends extend 2-1/)

This closed-hinged style bottom bake element is located on the bottom of the oven cavity to supply the heat for baking. This bake element has screw-on wire terminals is 18 1/4-inch wide and 14 1/2-inch deep to mounting flange and the terminal ends extend 2 1/2-inch past the flange. The element is 2300 watts and 20 volts. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This is a genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Infinite heat switch kit (stove top surface element control switch kit. If the surface element is not heating the element can be tested to determine if it is defective.)

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Broil element (oven broiler heating element with screw-on terminals)

The broil element is located on the roof of the oven cavity to supply heat for broiling. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. The mounting bracket is not included with the element. If the element is no longer heating or it has shorted out, then you will need to replace your broil element. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

8 inch surface burner element (8" electric coil surface heating element)

This part fits most ranges where a ceramic terminal block is used.

Surface element - 6" - 1325w (6" electric coil surface heating element)

Electronic clock and timer kit (electronic clock kit, replaces mechanical clocks with more reliable digital timer. *note: Wiring may be difficult, best to have installed by an applia)

This electronic clock replaces the mechanical clocks with a more reliable digital timer. As per the manufacturer, this part should be installed by appliance repair person.

Oven sensor (oven sensor assembly)

This sensor offers 16 ohms of resistance at room temperature, though the resistance increases as the temperature increases.

Control bd (oven control)

Discontinued (oven light door-activated switch, 2 terminal)

Discontinued (oven selector switch)

Discontinued

Discontinued (rheostat)

Switch (push button switch kit)

Discontinued (hot wire relay)

Discontinued (switch)