VBXR1090BC GE Washer Parts List

Search the entire VBXR1090BC by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 7 8
1-15 of 115

Tub dampening strap (washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.)

This part is used to support the tub and keep it in the center of the cabinet to reduce vibration. If your washer is making loud noises, or shakes or moves, one or more of the straps may have broken. It is recommended to replace all 4 tub dampening straps at the same time. This part is sold individually.

Easy Part #:
EAP271100
Availability:
In Stock
Price:
$8.95

D-shaped knob clip (metal insert for dryer control knob.)

This control knob clip helps secure the timer knob to the shaft allowing you to select the desired setting for your dryer. If the knob has become loose or the clip is missing you will need to replace the clip. This clip is a genuine OEM part, made of metal and is sold individually.

Easy Part #:
EAP268493
Availability:
No Longer Available

Agitator coupling kit (washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.)

This is a washing machine agitator coupling kit also known as an agitator drive belt. It connects the transmission drive shaft to the agitator base. It includes the couple, gasket, and bolt. If the teeth on the coupler is worn out it will cause the agitator not to turn and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:
EAP1517844
Availability:
In Stock
Price:
$26.43

Tub seal (washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.)

The tub seal helps prevent any leaking around the transmission of your washer outer tub. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. It is suggested to have it installed by a qualified technician because the seal can be difficult to replace. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP4704237
Availability:
In Stock
Price:
$12.50

Drain hose (washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.)

This corrugated drain hose carries the drain water from the washer to the house drain. It is black in color, measures 57-inches long, and both ends of the drain hose can be bent. If your drain hose becomes damaged or cracked, it will cause water to leak on the floor during the wash cycle and you will need to replace the hose. This is a genuine OEM part. Please make sure you shut off the water supply and disconnect the power to the washer before starting your repair. Note: Clip is not included.

Easy Part #:
EAP890597
Availability:
In Stock
Price:
$24.10

Timer knob clip (plastic retainer clip to hold timer knob on timer shaft)

The timer clip is located on the back of the timer knob and helps secure the timer knob to the timer shaft allowing you to select the desired time setting for your dryer. If the knob has become loose or the clip is missing or broken, you will need to replace the clip. This clip is made of plastic and measures 1”. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP270835
Availability:
In Stock
Price:
$10.24

Drain pump and motor assembly (washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle.)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP8768445
Availability:
In Stock
Price:
$59.61

Hub nut (hub nut for top-load washer. If this nut is stripped or damaged, the washer may be noisy.)

This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. This hub nut is approximately 1.5 inches in diameter. This is an OEM part sourced directly from the manufacturer. You will need a hub nut wrench and some WD40 to loosen the nut and remove it from the agitator shaft.

Easy Part #:
EAP271505
Availability:
In Stock
Price:
$11.23

Split ring (split ring bushing at outer tub)

This split ring is two inches in diameter.

Easy Part #:
EAP1766022
Availability:
In Stock
Price:
$7.26

V-style drive belt (washing machine drive belt - lengh is 29 1/2 inches.)

The V-style drive belt works in conjunction with your washing machine by connecting the drive motor to the drive system in your washer to spin the tub. If the tub is no longer moving the belt may be bad and will need to be replaced. The drive belt measures 29 1/2” L x 1/2” W. Please remember to disconnect the water supply and power to the washer before starting your repair. This is a genuine OEM V-style drive belt.

Easy Part #:
EAP270803
Availability:
In Stock
Price:
$13.73

Dual water inlet valve (washer water inlet valve. If the washer does not fill or fills slowly then the water inlet valve may be defective.)

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

Easy Part #:
EAP1155105
Availability:
In Stock
Price:
$71.77

Tub bearing washer (washer tub bearing. This tub bearing helps to keep the inner tub spinning smoothly.)

The tub bearing washer goes between the transmission and the tub bearing in your washer. This part helps to keep the inner tub spinning smoothly during operation. If your washer is noisy you may hear the bearing wearing on the transmission and the tub bearing washer will need to be replaced. This part is gray in color and measures approximately 2” in diameter. This is a genuine OEM part. Please disconnect the power and water supply to the washer before starting this repair.

Easy Part #:
EAP271509
Availability:
In Stock
Price:
$9.28

Drain hose clip (mounting clip for washing machine drain hose.)

This clip holds the drain hose to the back of the washer.

Easy Part #:
EAP270508
Availability:
In Stock
Price:
$8.39

Compression ring (compression ring for knob dial)

Used in conjunction with the timer dial knob assembly.

Easy Part #:
EAP652828
Availability:
In Stock
Price:
$17.80

Hub washer

This is a replacement hub washer for your washing machine. If your washer is noisy, leaking, shaking, or pumping without spinning, you may need to replace the hub washer. The hub washer is found under the washer tub, beneath the split ring. You will need to remove the tub to access it. Before doing so you should disconnect the power and water sources from washer. The washer is made of metal and is a little more than an inch in diameter. It is sold individually, and is an OEM part.

Easy Part #:
EAP271511
Availability:
In Stock
Price:
$8.57
< PREV 1 2 3 4 5 6 7 8
1-15 of 115