Parts for Kenmore Models VVSR1030FW

Tub dampening strap (washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.)

This part is used to support the tub and keep it in the center of the cabinet to reduce vibration. If your washer is making loud noises, or shakes or moves, one or more of the straps may have broken. It is recommended to replace all 4 tub dampening straps at the same time. This part is sold individually.

Easy Part #:: EAP271100

Availability:: In Stock

Price:: $8.95

D-shaped knob clip (knob clip)

This control knob clip helps secure the timer knob to the shaft allowing you to select the desired setting for your dryer. If the knob has become loose or the clip is missing you will need to replace the clip. This clip is a genuine OEM part, made of metal and is sold individually.

Easy Part #:: EAP268493

Availability:: No Longer Available

Tub seal (washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.)

The tub seal helps prevent any leaking around the transmission of your washer outer tub. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. It is suggested to have it installed by a qualified technician because the seal can be difficult to replace. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP4704237

Availability:: In Stock

Price:: $12.50

Drain hose (washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.)

This corrugated drain hose carries the drain water from the washer to the house drain. It is black in color, measures 57-inches long, and both ends of the drain hose can be bent. If your drain hose becomes damaged or cracked, it will cause water to leak on the floor during the wash cycle and you will need to replace the hose. This is a genuine OEM part. Please make sure you shut off the water supply and disconnect the power to the washer before starting your repair. Note: Clip is not included.

Easy Part #:: EAP890597

Availability:: In Stock

Price:: $24.10

Drain pump and motor assembly (washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle.)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP8768445

Availability:: In Stock

Price:: $59.61

Compression ring (compression ring for knob dial)

Used in conjunction with the timer dial knob assembly.

Easy Part #:: EAP652828

Availability:: In Stock

Price:: $17.80

Inner tub base hub (hub, inner tub base)

This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.

Easy Part #:: EAP273296

Availability:: In Stock

Price:: $80.33

Socket rod support - white (suspension rod support)

This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the rod can prevent the tub from shaking too much during operation. If your washer is shaking excessively or emitting an odd sound during use, it may be because the rod support is broken, and the suspension rod is not able to do its job. This part is made of white plastic and is sold individually.

Easy Part #:: EAP268394

Availability:: In Stock

Price:: $10.79

Water level pressure switch (pressure switch for water fill level)

This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine running once the correct water level has been reached.

Easy Part #:: EAP269790

Availability:: In Stock

Price:: $47.94

Transmission and brake assembly (transmission and brake assembly, includes new tub seal)

This transmission and brake assembly comes with a new tub seal. This kit aids in the spinning or agitating cycles.

Easy Part #:: EAP271743

Availability:: No Longer Available

Screw - black (screw 8-18 ab ihwp 7/8 s)

This screw is sold individually.

Easy Part #:: EAP268950

Availability:: In Stock

Price:: $6.97

Outer tub (washing machine outer tub. *for tub bearing see related items.)

This part holds the water during the wash cycle and houses the spin basket.

Easy Part #:: EAP9493102

Availability:: Special Order

Price:: $172.20

Tub cover - white (upper outer tub cover)

This cover goes on top of the balance ring that is located on top of the basket.

Easy Part #:: EAP10055837

Availability:: In Stock

Price:: $121.11

Capacitor

This part increases the voltage to the drive motor to help start it.

Easy Part #:: EAP3406186

Availability:: In Stock

Price:: $33.93

Lid switch assembly

The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.