VWSR4160GW GE Washer Parts List

Search the entire VWSR4160GW by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5
1-15 of 67

Tub dampening strap (washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.)

This part is used to support the tub and keep it in the center of the cabinet to reduce vibration. If your washer is making loud noises, or shakes or moves, one or more of the straps may have broken. It is recommended to replace all 4 tub dampening straps at the same time. This part is sold individually.

Easy Part #:
EAP271100
Availability:
In Stock
Price:
$8.95

D-shaped knob clip (knob clip)

This control knob clip helps secure the timer knob to the shaft allowing you to select the desired setting for your dryer. If the knob has become loose or the clip is missing you will need to replace the clip. This clip is a genuine OEM part, made of metal and is sold individually.

Easy Part #:
EAP268493
Availability:
No Longer Available

Dual action agitator (washing machine agitator assembly.)

This plastic dual action agitator is white in color. It is approximately eighteen inches tall with a base diameter of about 12-1/4 inches. The agitator pivots back and forth, moving the clothes from the top to the bottom of the tub, through the detergent and water to wash them. If the agitator becomes damaged or will not agitate, you may need to replace the part. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP1482519
Availability:
In Stock
Price:
$57.86

Tub seal (washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.)

The tub seal helps prevent any leaking around the transmission of your washer outer tub. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. It is suggested to have it installed by a qualified technician because the seal can be difficult to replace. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP4704237
Availability:
In Stock
Price:
$12.50

Drain hose (washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.)

This corrugated drain hose carries the drain water from the washer to the house drain. It is black in color, measures 57-inches long, and both ends of the drain hose can be bent. If your drain hose becomes damaged or cracked, it will cause water to leak on the floor during the wash cycle and you will need to replace the hose. This is a genuine OEM part. Please make sure you shut off the water supply and disconnect the power to the washer before starting your repair. Note: Clip is not included.

Easy Part #:
EAP890597
Availability:
In Stock
Price:
$24.10

Drain pump and motor assembly (washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle.)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP8768445
Availability:
In Stock
Price:
$59.61

Knob and clip (selector knob, white)

This knob accepts a D-shaped shaft.

Easy Part #:
EAP1482289
Availability:
In Stock
Price:
$12.14

6-rib drive belt (washer drive belt. The new belt will seem too small during installation. However, it will stretch and we offer a belt tool to help.)

This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.

Easy Part #:
EAP1482278
Availability:
In Stock
Price:
$23.49

Compression ring (compression ring for knob dial)

Used in conjunction with the timer dial knob assembly.

Easy Part #:
EAP652828
Availability:
In Stock
Price:
$17.80

Agitator coupling (washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.)

Bolt not included. This part connects the transmission drive shaft to the agitator base.

Easy Part #:
EAP1482517
Availability:
In Stock
Price:
$23.85

Timer knob (timer knob, white)

This part is a replacement control knob for your washer. The control knob allows you to select the desired setting for your wash cycle. If your washer will not start or the timer will not advance, you may need to replace the control knob. Occasionally the control knob will become worn, and when this happens the control knob dial will not turn, and you will not be able to select the appropriate setting. If your control knob is worn, broken, or missing, you will need to replace it. The control knob is made of white plastic and is approximately 2 inches in diameter. The control knob is sold separately from the control knob dial, so be sure to confirm which part you need to complete your repair.

Easy Part #:
EAP1482290
Availability:
In Stock
Price:
$17.80

Lid switch with wire harness (lid switch and wire harness assembly. The lid switch assembly prevents the washer from spinning if the lid is open.)

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.

Easy Part #:
EAP1482372
Availability:
In Stock
Price:
$41.73

Timer (washing machine timer control assembly, quick connect.)

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

Easy Part #:
EAP1482380
Availability:
No Longer Available

Inner tub base hub (hub, inner tub base)

This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.

Easy Part #:
EAP273296
Availability:
In Stock
Price:
$80.33

Shaft and mode shifter assembly (shaft and mode shifter assembly. The new mode shifter mounting holes are not threaded. You will need to use the original self tapping screws to instal)

Also known as the gearcase or transmission. This part helps move the agitator back and forth during the wash cycle. New shifter mounting holes are NOT threaded, use original self tapping screws to install new part. Tub seal is included with assembly.

Easy Part #:
EAP2354082
Availability:
In Stock
Price:
$225.79
< PREV 1 2 3 4 5
1-15 of 67