Parts for Kenmore Models WCCB1030F

Tub dampening strap (strap damping)

This part is used to support the tub and keep it in the center of the cabinet to reduce vibration. If your washer is making loud noises, or shakes or moves, one or more of the straps may have broken. It is recommended to replace all 4 tub dampening straps at the same time. This part is sold individually.

Easy Part #:: EAP271100

Availability:: In Stock

Price:: $9.05

Dual action agitator (agitator asm multi)

This plastic dual action agitator is white in color. It is approximately eighteen inches tall with a base diameter of about 12-1/4 inches. The agitator pivots back and forth, moving the clothes from the top to the bottom of the tub, through the detergent and water to wash them. If the agitator becomes damaged or will not agitate, you may need to replace the part. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP1482519

Availability:: In Stock

Price:: $58.53

Agitator coupling kit (scr 1/4-20 mch 5/8 s)

This is a washing machine agitator coupling kit also known as an agitator drive belt. It connects the transmission drive shaft to the agitator base. It includes the couple, gasket, and bolt. If the teeth on the coupler is worn out it will cause the agitator not to turn and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:: EAP1517844

Availability:: In Stock

Price:: $26.74

Tub seal (seal tub)

The tub seal helps prevent any leaking around the transmission of your washer outer tub. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. It is suggested to have it installed by a qualified technician because the seal can be difficult to replace. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP4704237

Availability:: In Stock

Price:: $12.64

Drain pump and motor assembly (washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle.)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP8768445

Availability:: In Stock

Price:: $60.31

Hub nut (hub nut for top-load washer. If this nut is stripped or damaged, the washer may be noisy.)

This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. This hub nut is approximately 1.5 inches in diameter. This is an OEM part sourced directly from the manufacturer. You will need a hub nut wrench and some WD40 to loosen the nut and remove it from the agitator shaft.

Easy Part #:: EAP271505

Availability:: In Stock

Price:: $11.23

Split ring (split ring bushing at outer tub)

This split ring is two inches in diameter.

Easy Part #:: EAP1766022

Availability:: In Stock

Price:: $7.26

V-style drive belt (belt)

The V-style drive belt works in conjunction with your washing machine by connecting the drive motor to the drive system in your washer to spin the tub. If the tub is no longer moving the belt may be bad and will need to be replaced. The drive belt measures 29 1/2” L x 1/2” W. Please remember to disconnect the water supply and power to the washer before starting your repair. This is a genuine OEM V-style drive belt.

Easy Part #:: EAP270803

Availability:: In Stock

Price:: $13.89

6-rib drive belt (belt)

This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.

Easy Part #:: EAP1482278

Availability:: In Stock

Price:: $23.76

Tub bearing washer (washer tub bearing)

The tub bearing washer goes between the transmission and the tub bearing in your washer. This part helps to keep the inner tub spinning smoothly during operation. If your washer is noisy you may hear the bearing wearing on the transmission and the tub bearing washer will need to be replaced. This part is gray in color and measures approximately 2” in diameter. This is a genuine OEM part. Please disconnect the power and water supply to the washer before starting this repair.

Easy Part #:: EAP271509

Availability:: In Stock

Price:: $9.39

Tub bearing (bearing tub)

This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you may need to replace the tub bearing. This bearing is made of metal, and is approximately 3 inches wide and 2 inches tall.

Easy Part #:: EAP271510

Availability:: In Stock

Price:: $25.91

Drain hose clip (mounting clip for washing machine drain hose.)

This clip holds the drain hose to the back of the washer.

Easy Part #:: EAP270508

Availability:: In Stock

Price:: $8.49

Hub washer

This is a replacement hub washer for your washing machine. If your washer is noisy, leaking, shaking, or pumping without spinning, you may need to replace the hub washer. The hub washer is found under the washer tub, beneath the split ring. You will need to remove the tub to access it. Before doing so you should disconnect the power and water sources from washer. The washer is made of metal and is a little more than an inch in diameter. It is sold individually, and is an OEM part.

Easy Part #:: EAP271511

Availability:: In Stock

Price:: $8.66

Agitator coupling (coupling agitator)

Bolt not included. This part connects the transmission drive shaft to the agitator base.

Easy Part #:: EAP1482517

Availability:: In Stock

Price:: $24.12

Pump to tub inlet drain hose (hose drain inlet(tub to))

This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.